Questions tagged [touchscreen]

Use this tag for questions about touchscreen compatibility, and how to use compatible touchscreens with the Raspberry Pi.

Filter by
Sorted by
Tagged with
0
votes
0answers
25 views

Driver corrupts OS

I've been working on a PI project, I am using Waveshare 7" touchscreen, now I need to download driver to enable touchscreen, I tried downloading it from their website: https://www.waveshare.com/...
0
votes
0answers
19 views

How do I turn touchscreen on and off while pi is running?

I have this touchscreen: http://www.lcdwiki.com/3.5inch_RPi_Display How do I turn the touchscreen on and off when I want? All the guides I read were about turning an HDMI screen off (I can already do ...
0
votes
0answers
21 views

Connect small touch-sensitive display to Pi 4 HDMI output to zoom-in on live PiCam camera output in order to carefully focus on some detail?

I have a RPi 4 + HQ PiCamera connected to a computer several meters away via ethernet. I can see live feed from the camera on the ethernet-connected PC in several ways: Configure as a webcam by ...
0
votes
0answers
19 views

Raspberry pi waveshare7 inch touchscreem lineage os

I'm recently using raspberry pi with lineage installed on it . When i connect to tv as monitor every thing is perfect. But when I'm using wave_Share 7 inch touchscreen. Connection to internet failed. ...
0
votes
0answers
17 views

Problems with Raspberry and touchscreen

I'm working on a Raspberry Pi project and I need to use touchcreen, I got 7" Waveshare touchscreen, I plugged it in my Raspberry Pi (via GPIO pins) and touch didn't work... I went on their ...
1
vote
0answers
45 views

FM Receiver with raspberry pi

I was wondering if there was any way to make a software-only radio that will use all the components included in a raspberry pi 3B+. I've been doing some research and all of the FM models that I found ...
0
votes
1answer
100 views

How to control raspberry pi 4 GPIO pins by running android application in the rpi and in mobile?

I am trying to build a project based on IoT. My goal is to trigger relays connected to GPIO pins in rpi4 by using an android application running in rpi4 itself which can be accessed with an official ...
1
vote
0answers
20 views

touch 7" rpi display does not wake up when in console after rpi display goes blank

I am running Pihole+PADD on my Rpi with Raspberry 7 inch touch display on a continous basis. For power and screen save reason I have activated blank screen after 300 seconds through raspi-config, ...
0
votes
0answers
10 views

Openbox chromium browser Companion emulator

Do you have a solution to select a window part of a web page and take that on full screen with OpenBox chromium browser? You can look on photos why.
1
vote
0answers
69 views

QT Creator - Raspberry Pi - 3.5" TFT - Could not initialize egl display

Please forgive my ignorance but I'm new to Raspberry Pi/Linux. I'm trying to make a touch screen app for the Pi using a 3.5" touch screen (xpt2046) and QT Creator (5.12.5). QT Creator is running ...
0
votes
0answers
19 views

Kiosk-mode with CLI

I am writing a command-line application using NCurses and I have a Raspberry Pi with a Kano "Make Your Own Tablet" kit which is essentially a touchscreen with some accessories attached. I ...
0
votes
0answers
19 views

Official Raspberry Pi Touchscreen display - Touch not working on the right of the display

I recently changed from HDMI display to official PI display. Although I was using this initially with keyboard and mouse, later I see the need for using touch. What I found was the touch was not ...
0
votes
0answers
20 views

How to full screen the app window in Rpi 7in TFT

I'm currently working on an app for rpi using kivy that will be displayed in a 7in TFT. I used the 7in TFT resolution as window size (800,480) I am developing the code in windows pc since coding it in ...
0
votes
1answer
32 views

Backlight control with 2.4 Inch display

I have 2.4 Inch display attached to a Raspberry Pi 3B+, it totally works, but I've noticed that when raspbian turn off the display, the backlight led is still on. There is a way to control the ...
0
votes
1answer
76 views

Set custom screen blanking time

I have a Raspberry Pi 4 with the official 7" touchscreen with the latest Raspberry Pi OS installed. In the GUI, I've turned on Screen Blanking. It does exactly what I want -- the screen's ...
1
vote
1answer
43 views

Most compatible/supported I2C based touchscreen to emulate?

Without going into boring details, I need to get a touchscreen input into a Raspberry Pi which will be "faked" by a microcontroller - so the micro is reading some input and translating it to ...
0
votes
0answers
32 views

Howto setup a touchscreen as pure display?

I have a Raspberry 3B that I am using with VNC. Now I want to use the 3.5inch RPi Display as a pure output device to display graphics, not for displaying the desktop on it, just using it as a ...
0
votes
0answers
17 views

Raspberry pi 2B is stuck on rainbow screen and the 7" official screen is white

My Raspberry pi 2B works perfectly fine when it is connected to my TV via HDMI. But when I connect it to the touchscreen at the same time, the touchscreen is just a white screen and on the HDMI, it is ...
0
votes
0answers
149 views

How can I rotate my screen with OctoDash installed?

I want to rotate the touchscreen on my Pi4 with Octoprint and OctoDash installed on to. I've opend the file /boot/config.txt and added the line "display_rotate=2", but nothing happend (yes I ...
0
votes
0answers
65 views

Touchscreen on Zero W without X?

I'm designing a Raspberry Pi Zero W project with a touchscreen. I want to use this screen. Would there be a way to use the touchscreen on that without having X? I'll be using /dex/fbX for the display.
0
votes
0answers
104 views

Touch screen double click area

I got rpi connected to two touch displays. My problem is if I try double click on touch I almost never touch the exactly the same spot two times (sometimes with nail) so the display registers it as ...
1
vote
1answer
112 views

Official Raspberry Pi 7" Touchscreen Display not working

I have bought an "Official Raspberry Pi 7" Touchscreen Display" and a raspberry pi, i have flashed the sd card with Kali Linux, but when i turn the pi on, there is nothing, but a white ...
0
votes
0answers
27 views

Twin touchscreens on Pi 3/4

I'm looking at a project where I will need to drive two separate displays from a Pi, both of which are touchscreen - specifically GT911 type on a separate I2C connection. This will almost certainly be ...
0
votes
0answers
93 views

config.txt conditional filter for 7" touch display?

I just bought a brand new Pi4 and official 7" touchscreen display along with case. I also have another existing Pi with HDMI monitor. I'm running a custom image based on Raspbian Lite plus ...
2
votes
0answers
864 views

RP 4 connecting to Asus ZenScreen monitor issue

I'm very new to RP and I recently bought a new RP 4 and wanted to use a portable touchscreen monitor with it, but I wanted something bigger than the 7-10" ones I saw. I went for this one after a ...
0
votes
1answer
34 views

How to physically turn the a Raspberry Touch display on and off?

I use a Raspberry Pi Touch Display that I connect like shown in the following picture to my Raspberry. The black and red wires are connected to thee GND and 5v pins respectively. Now I want to ...
2
votes
0answers
68 views

Difficulty executing command when raspberry pi loads

I have a raspberry pi 4B attached to a 7" raspberry pi touchscreen via the provided ribbon cable. In my application, I have my touchscreen rotated 90° by using display_rotate which is working ...
1
vote
1answer
75 views

Real touch inputs

I'm developing a touch first website which I plan to display on a raspberry pi using a touchscreen. When I tested the website on the pi (raspberry pi os) using a waveshare touchscreen, the website ...
0
votes
0answers
17 views

pi4 + Official Touch Screen+ old installation

I have a Pi4B+ and have already installed a 3.5" display from Joy-IT. There I needed to configure manually the boot/config.txt as well as some of the Xorg parameters. Since the display remains ...
0
votes
0answers
39 views

Raspberry Pi integrating into existing touch screen

I have a car headunit which is touch screen and it has RCA AV input option. I've connected a raspberry pi using a HDMI to RCA convertor. The raspberry pi shows up on the screen. I want to run OpenAuto ...
0
votes
1answer
103 views

How to deal with VNC login issues and error

I'm doing a project with a Pi 4B, the official touchscreen and the latest version of Raspberry Pi OS. I would like to connect to the Pi via VNC (RealVNC Viewer on Windows 10) at a higher resolution ...
0
votes
1answer
202 views

How does the Kedei 3.5" 800*480 SPI touch screen version 1.1 work with a Pi 4?

I am trying to set up a Kedei Raspberry Pi Display version 1.1 2017/10/10 Type 3590 (horizontal 800*480px) with my Pi 4. Unfortunately, I didn't manage to get the Touch Screen running on SPI. The HDMI ...
0
votes
1answer
339 views

Rotate HDMI Touchscreen on RPi3 (Balena OS)

I’m trying to use the raspberry pi 3 in kisok mode on a 27" hdmi/touchscreen display on portrait mode I’ve managed to rotate the display with the configuration ...
2
votes
1answer
1k views

Chromium and virtual keyboard with automatic popup

I want to run Chromium in full screen (kiosk) on Raspbian Stretch. I have a touch screen and I need a virtual keyboard to popup when I enter a text field. On Debian 9, I have gotten this to work ...
0
votes
1answer
38 views

Mirror imaging the Raspbian desktop for GPIO screens

How can I make the raspbian desktop look like I am viewing in front of a mirror? (basically backwards) I've already looked in the documentation for config.txt (here is a link) and tried to use rotate, ...
0
votes
1answer
86 views

Raspberry Pi screensaver/DMPS on/off to trigger shell script on change

I've got a touch screen without backlight control and and turning off the HDMI-output just brings up a "no signal" placeholder on the screen. I've soldered a octocoupler to the power toggle ...
0
votes
1answer
99 views

Pi Touchscreen Dim with Chromium kiosk — how can I switch on/off/dim through REACT or NODE.JS commands?

Auto switching touchscreen on/off is critical for our project with 9 RPi's in large home with 6 bedrooms, living, study, play room, etc. The app is React on Chromium kiosk mode, running Node.js ...
0
votes
0answers
449 views

RPI4 Ubuntu 20.04 touchscreen

I have a Raspberry Pi 4 with Ubuntu 20.04 installed attached to a 22" hannspree touchscreen that reports as a "Weida Hi-Tech CoolTouchR System" USB device to /proc/bus/input/devices ...
0
votes
1answer
88 views

Gestures not working on FT5336

I'm new to the CM3+ module, but I've worked extensively with other RPi products. I'm currently trying to implement my own FT5336 driver, but I'm having some slight problems, as the "Gesture" ...
0
votes
0answers
29 views

DTOverlay for Focaltech ft6336c touchscreen

I have a touchscreen which uses the ft6336c driver for the touch (the video is sorted via a DPI interface). I have found that there is a kernel driver, edt-ft5x06.ko but I can't find an overlay. Does ...
1
vote
0answers
690 views

Raspberry Pi 4 7inch HDMI touchscreen issues

I am using 7 inch HDMI touch screen with Raspberry Pi 4. I am having below issues: I have connected the HDMI cable to the touchscreen and connected the mini hdmi to hdmi0 of pi. I have also connected ...
0
votes
2answers
155 views

Raspberry pi Touchscreen CSI to HDMI extension

I need to connect my raspberry pi 7 inch touchscreen to my raspberry pi board from a distance of 5m, so I bought some CSI/HDMI extensions that seem to work great with a 1m cable, but when I try o ...
1
vote
0answers
51 views

Raspberry Pi white screen after several days what is the problem

I have a Raspberry Pi that is connected to a touchscreen via HDMI. After several days the screen becomes white and it does not work anymore. When you reboot the Pi it works again. The Pi is used to ...
0
votes
1answer
90 views

Screen locked after screensaver blank screen only

Using xscreensaver I'm trying to suspend/blank the screen (essentially turn it off to save power) without locking but I don't seem to be able to do this. I'm using the official 7" touchscreen. I have ...
1
vote
0answers
55 views

Is it possible to connect two touch screens to the Pi 4

So I know the Pi 4 will support dual monitors out of the box no problem. I am wondering if it will support dual touch screens as well. If so is there any particular issues or configuration needed to ...
1
vote
0answers
123 views

Kivy on Raspberry Pi returning double on_press events

I have an RPi and official touchscreen running Debian Buster and Kivy v1.11.1 using the simple example at https://kivy.org/doc/stable/api-kivy.event.html it is returning double touch events for ...
0
votes
1answer
84 views

How to have piTFT3.5 screen brightness 0 at boot

I have an Adafruit piTFT3.5 running on a pi zero running raspbian-light. For this specific project the screen brightness should be 0 until a python script tells it to turn on. Right now I achieved ...
0
votes
1answer
213 views

edt_ft5x06 touchscreen probe failed with code -121

I am trying to get ER-TFTM070_5 display with capacitive touch screen to work. I hae gotten as far as getting the screen it self to work. Now I am facing a challenge to get the touch screen digitiser ...
0
votes
0answers
51 views

The mouse buttons in the Onboard virtual keyboard prevent the touchscreen from working outside of the Onboard window

In Onboard, right after tapping one of the mouse buttons, the touchscreen no longer allows taps outside of the Onboard window. It doesn't allow me to right click anywhere. What could be causing this, ...
1
vote
0answers
113 views

No Y axis on Raspbery Pi TFT touchscreen

I have a TFT 3.5" display (this one), and I can only get one axis to work - that is, touching the screen moves the mouse along the bottom of the screen on the X axis only, regardless of where I touch ...

1
2 3 4 5
9