Questions tagged [video]

Questions related to playing or editing video on the Raspberry Pi, both in SD and HD.

139 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
4
votes
1answer
1k views

Capture AV/HDMI and stream over the network? (+IR extender too, maybe?)

Is it possible to have the Pi take-in/capture footage then stream that footage over the network? Could I also attach an IR receiver to one Pi, and have it repeat from an IR receiver on another Pi? ...
3
votes
0answers
216 views

Does the Raspberry Pi 4 support HDCP?

I could not find a definitive answer anywhere in the specs or on the web. I am looking for a device that will allow me to play Amazon Movies (and those of other platforms) in 4K. Thank you!
3
votes
0answers
154 views

Can a Raspberry Pi 3 play videos from Ustream?

I am thinking about purchasing a Raspberry Pi 3 to stream video from Ustream in a web browser. Is a Pi 3 running Raspbian capable of doing this without choppy video? Does it have the necessary codecs? ...
3
votes
0answers
165 views

VGA with a twist

I have a strange application where I need to use the VGA output, but with a twist.. The format needs to be 888 instead of the standard 666, AND the VGA sync signals (H-Sync and V-Sync) must be absent....
3
votes
2answers
2k views

Can I set the camera's shutter speed for video?

I need to have a low shutter speed to be able to capture a light that is only on for a few milliseconds each frame (light synced with camera fps, but only want it to capture when the light is on). How ...
3
votes
2answers
1k views

How to transcode an mkv video to mp4 using gstreamer and omg?

I have noticed that gstreamer1.0 on Raspbian comes with the omx plugins: pi@pi ~ $ gst-inspect-1.0 | grep omx omx: omxh264enc: OpenMAX H.264 Video Encoder omx: omxvc1dec: OpenMAX ...
3
votes
0answers
363 views

Show *modified* video from camera on screen

There are many tutorials how to show video from camera on screen (like this one). I need to modify video stream with simple but custom filter. Stream may be low-res, so CPU should have enough juice. ...
3
votes
2answers
641 views

2560x1080 how many Hz?

Periodically I’m tempted by the ultra wide monitors on the market. If I buy one, it’ll be the 29” LG but my question is can the new pi 3b+ do 60 Hz at 2560x1080?
2
votes
0answers
21 views

Video tearing in custom Electron app but not with included Chromium app

I have firstly played with the Raspbian config for video to see if that's the cause but after trying the web app within a different browser (Chromium included) it works. I have a web version of my ...
2
votes
0answers
62 views

Extend Official Display Connections

Is there a type of extender for the official Pi display connections? I don't mean the 15 pin FFC, but the two directly on the display. I'm mounting the driver board separately from the display in a ...
2
votes
1answer
57 views

Running videos on JavaFX in Raspberry Pi Zero

I am trying to run a program which shows a simple video through mediaView and then shows a QR code that is associated with a string that the program generates on javaFX in a Raspberry Pi Zero. I have ...
2
votes
2answers
355 views

vcgencmd in buildroot

I am using buildroot to create a custom os for my raspberry pi. I would like to use the vcgencmd command, but I am unable to find the package that includes these tools. I have tried searching the ...
2
votes
1answer
713 views

USB cam with raspberry pi 3: achieving maximum FPS

I am using a ub camera with raspberry pi. When I run v4l2-ctl --list-formats-xext, I get the max FPS is 15 with resolution of 2592x1944. However when I run ffmpeg -t 5 -f v4l2 -framerate 15 -...
2
votes
0answers
86 views

Libav-tool avconv: Error Creating Filter when Combining Still Images

I'm trying to use the Libav tool to collate still images into mp4 file. I am using it like this avconv -r 1 -I *jpg -vcodec libx264 filename.mp4 The images are named with the date and time and form ...
2
votes
0answers
253 views

audio video out of sync / framerate issue?

I am trying to sync the raspberry pi camera (revision 1.3) to an external microphone. The sync is fine for the first 5 minutes or so, but around the 20 minute mark, the difference becomes really ...
2
votes
0answers
146 views

Output a fake TV Channel?

I recently went on a Disney cruise with my family and the TV had different channels that had films on a loop different channels were different categories. My wife and I REALLY liked this and wanted ...
2
votes
0answers
475 views

Jessie: v4l2 streaming works with RPi 1B+, but not with 2B or 3B

I just recently upgraded my series of Pi's (1B+, 2B, 3B) to Raspbian Jessie Lite. Now, when I try to setup a stream with my Pi NoIR Camera as I did in Wheezy, sudo modprobe bcm2835-v4l2 cvlc v4l2:///...
2
votes
0answers
302 views

HDMI Passthrough on TV

I am researching the feasibility of using a Raspberry Pi as a pass-through device on my TV. The goal is to put this in the middle of a connection between the cable box and the tv. I would like the ...
2
votes
0answers
1k views

How do I delay video from the raspberry pi camera module and output it through hdmi?

I would like to have my camera module take video, delay that video for 15 seconds, and then have it sent through the HMDI cable to a monitor. I am new to Raspberry Pi's and figured the best way to ...
2
votes
1answer
2k views

Problem recording video with audio from usb soundcard using avconv

What I'm trying to accomplish in this program is that when video and sound is captured, the output file is .mp4 extension (or some other, like .ogv), with video and sound. I know how to capture video ...
2
votes
0answers
178 views

Raspberry Pi B can be seen on LAN but no Video output on either HDMI or RCA

My Raspberry Pi B running RaspBMC recently stopped working, I found that the SDCard had died. I rebuilt a new SDCard with the latest RaspBMC download. The LEDs on the Pi all illuminate, I can see ...
2
votes
0answers
3k views

OMXplayer problem from UDP

I'm streaming a video from a linux pc, with avconv: avconv -re -i video.mov -c:v libx264 -f mpegts udp://raspIP:1234 And from my rasp I'm trying to view this video omxplayer -i udp://linuxIP:1234 ...
1
vote
0answers
30 views

Overlay text to a playing video

My project will play a video on a Pi with some buttons attached to the GPIO. What I need is to pop up a menu in response to those buttons, ideally without pausing the video if it's playing. I've seen ...
1
vote
0answers
317 views

RPI 4 - ffmpeg - how to get hardware h.264 decoding to work?

I have had good success on the RPi 3 using ffmpeg to decode h.264 streams from various Ethernet video sources. However, on the RPi 4, when I include the -c:v h264_mmal directive, it appears to ...
1
vote
0answers
52 views

Horizontal lines on video capture

There are random lines in my camera recording. I have this system running on a vehicle. I doubt the following three to be the reason. Help me identify the root cause. Vibration of the camera ...
1
vote
0answers
44 views

Stream camera input over 5G WiFi to multicast address using FFMpeg

I am trying to stream my Intel RealSense D435 RGB camera input to a multicast address on my network. Please note, video streaming, encoding, is very new to me - I do not understand much, when ...
1
vote
0answers
331 views

Broadcast camera feed to network using Raspberry Pi 4 with FFMpeg

Good day all So I have to try to stream my Intel Realsense D435 camera to my local network. After reading up on many different sites, tutorials, etc I figured out the following: What can I do with ...
1
vote
0answers
528 views

Is there a way to enable VSYNC on RPI4?

I am using Raspbian Buster with default LXDE/Openbox configuration. Screen tearing when moving windows around or watching videos is very noticeable. Is there a way to enable VSYNC on RPI4 using HDMI?
1
vote
0answers
122 views

Assign multiple webcams to fixed /dev/video* at boot

I'm currently working on a project that requires taking pictures with 3 USB webcams but whenever I boot the raspberry, it assigns randomly a /dev/video "address" to each one of them. I'm not using ...
1
vote
0answers
61 views

Setting application screen display layer

I am displaying a video onscreen with omxplayer using '--l 0' Is it possible to run a python program and set it's screen layer to > 0 Expanded info :- I am running omxplayer from within a python ...
1
vote
0answers
18 views

VLC player logo stays at task bar even after closing!

Most of the time after watching a video while I am closing the VLC player, there always is a task stays in the task manager and task bar, I can't play any video until I manually kills it from task ...
1
vote
0answers
35 views

Schedule Video Recording

The code below records video for 24 hours straight which is too much. I wanna schedule the record like from 9.00am to 3.00pm only 6 hours of video. Being a novice and newbie I don't really know how to ...
1
vote
0answers
69 views

Pi-4 and going into weird video mode

I recently purchased my Pi-4 and am quite impressed with the performance. However, I'm also noticing a problem after the board has been running for a little while. Initially, everything is beautiful, ...
1
vote
0answers
182 views

Videocalls/conferencing with the Pi4B 4gb model?

so I'm currently looking for a way to do two way video calls between the pi and an android device but most of the solutions I can find for this are from tutorials or software that is either not ...
1
vote
1answer
255 views

Raspbian Buster Video Player Display

I installed Rasppian buster on pi 3 on my 8GB SDCard, No issue what so ever playing video on Chrome, VLC, etc. I now did a squashfs file to boot Raspbian Buster via Berryboot where I have more storage ...
1
vote
0answers
106 views

Video lags in VLC (Raspbian Buster) in Raspberry Pi 2

I installed a fresh image of Raspbian Buster in my Raspberry Pi 2. When I run the Big Buck Bunny video in VLC (both in full screen and window mode), the video lags.As far as I can remember, this did ...
1
vote
0answers
32 views

Different recording results under same code and raspberry pi

I would like to record videos using this code: RecordIntervalTime = 30*60 # 30 min def camRecord(): with picamera.PiCamera() as camera: camera.resolution = (640, 480) camera.framerate = 24 ...
1
vote
0answers
173 views

Best way to sync OMXPlayer video with audio stream?

I am having issues getting OMXPlayer video played on a TV via HDMI to sync with audio streamed over the network. My thought was delay the video output by ~500 ms then use pavucontrol to fine tune the ...
1
vote
0answers
22 views

No video on SV-3 instrument viewer

When I set the Pi (Zero) up with the required 640x480 60Hz mode in config.txt the SV-3 reports no signal. But if I plug a VGA Acer monitor in to the Pi and then unplug it, plugging in the SV-3 works! ...
1
vote
0answers
427 views

Live video streaming over bluetooth

I'm currently making a little project, and i need my Raspberry Pi 3b to transmit an USB webcam stream trough Bluetooth to display to an Android smartphone or any other portable device (like another ...
1
vote
1answer
582 views

Need advice on how to record video and audio using my RasPi

As an experiment and learning project, I want to create an action cam using my RasPi Zero W, the latest version of the RasPi camera module and an i2S microphone. I have found some RasPi action cam ...
1
vote
1answer
667 views

Raspberry Pi Zero hardware based video encoding

I'm trying to build a dashcam with a Raspberry Pi Zero with an official Raspberry Pi Camera (version 2) in an official Raspberry Pi Zero case mounted with a old GPS device cradle. I installed motion ...
1
vote
0answers
609 views

DIY conference room with Raspberry Pi

What is the best DIY conference room setup? Are there any free solutions that allow me to use a Raspberry Pi with a tv, webcam etc most importantly with its on dial in screen operable via remote (...
1
vote
0answers
639 views

Mame on Raspbian gives error: “Could not initialize SDL No available video device”

I am building a MAME cabinet. I got some ROMS, tested everything on my laptop, and now I am trying to put it on a raspberry pi 3 to use in the cabinet. I thought it would be nice to minimize memory ...
1
vote
0answers
282 views

How can I broadcast OSC messages to multiple RasPi's on my network?

I am trying to figure out how to broadcast OSC messages to multiple RasPi's on my network. I have 14 RasPi's, each running a video player that can be controlled with OSC. Each RasPi and connected to ...
1
vote
0answers
374 views

Displaying only video/image while python program running on background

I have a Raspberry Pi 3B with a Python3 code running 24/7. Right now, I'm running Raspbian Stretch desktop on console mode with no I/O. I only connect a screen via HDMI and an USB keyboard for ...
1
vote
0answers
996 views

3B+ Raspbian video playback slow

Just set up a brand new little system but when I try to play back videos they don't quite play at the right speed. It wouldn't be noticeable except that it makes the audio just a little flat- sounds ...
1
vote
0answers
430 views

How to wrap a H264 stream to a MP4 container

I have successfully streamed an h264 video over the local network with this command. raspivid -o - -t 0 -n -w 1280 -h 720 -vf -vs -fps 30 -b 3500000 | cvlc -vvv stream:///dev/stdin --sout '#rtp{...
1
vote
0answers
183 views

Picamera video problem (video is not complete)

I'm using my picamera in combination with the raspberry pi to capture video data synchrounously to other sensor data. Every sensor captures data in its own thread. All sensors start at the start of ...
1
vote
0answers
453 views

Trouble getting Flash Player plugin to run under Chromium

I have just set up a Raspberry Pi 3 model B, which came with the "Boolean Box" for my daughter. Everything worked fine, but the browser that was on the SD card did not run Flash, which would be ...