Questions tagged [vpn]

A VPN is a virtual private network. It extends a private network across a public network (e.g. the internet) by dedicated connections, virtual tunneling, or traffic encryption. VPNs can be used to securely access remote services.

Filter by
Sorted by
Tagged with
1
vote
1answer
98 views

Wireguard installation

So i was following this guide: https://sigmdel.ca/michel/ha/wireguard/wireguard_02_en.html#requisites It should be pretty simple but when installing wireguard my pi says: Building initial module for ...
0
votes
0answers
40 views

Preventing DNS Leaks on Raspberry Pi VPN Router

This is my first post, so hopefully I am doing it right. I am still a complete noob at Raspberry Pis, so bear with me here... Here is the story. I followed these tutorials on creating a WiFi hotspot, ...
1
vote
1answer
48 views

How to setup my Pi to proxy all LAN traffic through wifi?

I am quite new to linux and Raspberry Pi world and networking in general. I would like to add a VPN on my Pi, connect my XBOX to my Pi using LAN and have it act as a gateway of sorts so my XBOX is on ...
3
votes
2answers
58 views

How to install openforti vpn on a vanilla raspberry PI with raspian image?

Someone managed to get openfortivpn installed and working on a Raspberry PI with vanilla Raspian image? It seems it should be supported but all I get with apt-get install openfortivpn is that "the ...
1
vote
2answers
148 views

Would it be possible to setup ExpressVPN on the same PI as the Pi-hole?

I've managed to setup a PI-hole and my router is using the pi-hole as the DHCP server, and all my devices still have internet access. I would also like to install ExpressVPN on the Pi, so that all my ...
2
votes
1answer
106 views

AP Bridge VPN IPTABLES rules needed

I have set up an access point with a bridge (bridge: I want to be able to access all other devices within my network) using this How-To (Setting up a Raspberry Pi as an access point - the easy way). ...
1
vote
1answer
60 views

How to convert a Layer 3 VPN to a Layer 2 VPN?

I have been back and forth with some users here about creating a VPN using my Raspberry Pi 3 as a hotspot (OpenVPN client) but being able to bridge it to my other Rasperry Pi 3 at home (OpenVPN server)...
1
vote
2answers
195 views

PIVPN Wireguard + TOR

I have installed PIVPN with the Wireguard protocol. So from my mobile phone, for example, my data are encrypted between my mobile phone and VPN but not between my VPN and the Internet. Is there a way ...
0
votes
0answers
69 views

PIVPN with Wireguards - Hide IP

i have a question: i installed PIVPN with Wireguard protocol. From my mobile phone, my endpoint is the my ip public and with a specific port, I reach out my VPN. Perfect! My data are encrypted between ...
1
vote
1answer
45 views

Makes OpenVPN a local Apache Webserver accessable from outside?

I am running Apache on my Pi. It's only accessable from my local network. Now I want to install OpenVPN on the same Pi. Is Apache accessable from outside, when I enter the static ip in my browser (...
0
votes
0answers
18 views

Local DNS for 3 VPN connected sites

I currently have 3 R Pis running Dnsmasq at 3 sites providing local name resolution. Each site is connected to the other two with LAN-to-LAN VPNs. Each site also has dial-in VPN access. I would like ...
0
votes
0answers
93 views

Port forwarding issue. How do I troubleshoot?

I have a Pi, running Raspbian 10 Buster. I would like to portforward VNC and transmission. I have opened the ports in my router, firewall. The ports are still "closed". I was trying to see why is ...
0
votes
0answers
388 views

Does Raspberry Pi 4 processor support AES-NI instructions?

In the interest of minimizing timing attacks on my OpenVPN and similar connections, does Raspberry Pi 4 support AES-NI instructions? Some reference to AES is made in the technical reference manual, ...
0
votes
1answer
167 views

Using OpenVPN and having DNS Leak

I've only ever used Windows and this is my first time with a Raspberry Pi. All I wanted is to be connected to a VPN while acting as a hotspot so that my devices that connect to it will also be ...
0
votes
0answers
27 views

Wondering why my Pi VPN server (PiVPN) can only use TCP protocol but not UDP protocol

I have to make a personal VPN server using PiVPN with my Raspberry Pi 3B+ (Raspbian Jessie). I make my server according to this guide: https://www.cloudpro.co.uk/it-infrastructure/virtualization/7503/...
0
votes
0answers
618 views

Raspberry Pi 4 as a Wifi Hotspot with RaspAp + VPN + Pi Hole

I'm sure it has been discussed before, but I can't find the right answer after spending hours with googleing. I'm new to this device, I just got my new RP 4 and here's what I'd like to use it for: - ...
0
votes
0answers
121 views

Is raspberry pi 4 with 4Gig ram with pivpn a good solution for office vpn

Is raspberry pi 4 with 4Gig ram with pivpn a good solution for office vpn We have 15-20 staff that would use the vpn. Network usage mostly will be for RDP.
3
votes
1answer
803 views

How to bridge an access point with a remote network by Wireguard? (with the use of systemd-networkd)

Have been following a members' posts about using the Pi as a Wifi Repeater and/or Bridge and also bridging via openvpn. A member of this forum (Ingo) has provided awesome step-by-step instructions ...
0
votes
0answers
58 views

how can openvpn to autoconnect and not ask password for connecting to and ovpn profile

I installed sudo apt-get install network-manager-openvpn-gnome -y then I imported the my-openvpn-server.ovpn file like this: sudo nmcli connection import type openvpn file my-openvpn-server.ovpn ...
-1
votes
1answer
139 views

A problem with Raspberry Pi VPN Server

So recently I have setup my first VPN server with my Raspberry Pi 3 B+, using PiVPN, everything is fine until I have noticed that when I use Wifi, I can't connect to my VPN. But with 4G data, VPN is ...
0
votes
0answers
15 views

bridge repeater unsure what to call it

ok here is the set up router 1 ~~ pi ~~ router 2 ~~~ rest of the home router 1= public wifi (aka library) i need the rpi to pick the signal up using a [Alfa Long-Range Dual-Band AC1200 Wireless ...
0
votes
0answers
28 views

Run VNC server without VPN when VPN is enabled

I use Real VNC server and viewer to connect to my Pi over the internet and use ExpressVPN as my VPN provider, which works well in general. ExpressVPN is configured so that if for any reason the VPN ...
1
vote
0answers
18 views

Trouble getting hotspot to route through VPN

I'm currently trying to install a hotspot on raspberry pi for my smart room devices at university, but I can't seem to get the hotspot to route through my remote access vpn given by the university for ...
2
votes
1answer
46 views

pivpn inconsistent TLS handshake/authentication

I'm using pivpn(OpenVPN) on an rpi3B. When it works it works great, but I'm unable to successfully authenticate more often than not. I've tried it on 2 different wifi networks, with similar results. ...
1
vote
0answers
76 views

Raspberry Pi as VPN works, but can't access NVR

I have a Raspberry Pi 4 that allows me to VPN into my home network. I used PiVPN to setup the Pi as an OpenVPN server and create clients. I managed to setup a PC with the config file I got from the Pi ...
0
votes
0answers
14 views

where does pivpn store remote host name?

I installed openvpn via pivpn but now want to update the default location for clients to use when accessing my LAN from the internet. During the pivpn setup process I specified xxx.yyy.com as the ...
0
votes
1answer
45 views

Remote access SSH with PIVPN on RI3

I have a raspberry3 to my workplace and it is connected to internet by the LAN network. I want to access to the pi-hole interface remotely from my home and by ssh for any configuration on it. I ...
1
vote
1answer
195 views

RaspberryPi with openfortivpn

I'm using a fresh raspbian stretch SD card. Sorry if I can't get my meaning across well, I'm new to this and still learning. I'm trying to set up my Pi as a sort of VPN gateway/router. I'd love to ...
0
votes
1answer
53 views

openvpn exits with error 1194 port already in use

I have pivpn installed on my raspbian stretch running on 1194 port. in the beginning it was working fine , but now from few days I am getting this error on reboot. Sep 26 21:17:29 titan ovpn-bridge-...
0
votes
1answer
269 views

Do you have to port forward when using OpenVPN?

I'm going through an install of PiVPN (http://www.pivpn.io/) and it asks to specify a port. Some guides and videos say this needs to be forwarded from the router. Isn't the point of a VPN to not have ...
0
votes
0answers
119 views

Android apps on the raspberrypi

I would like to install android on my raspberry pi in order to play mobile games. My idea is to install android and than download apps and games from the play store similar to how any other device (...
1
vote
1answer
76 views

Can't get VPNSecure installed/running correctly on RPi3B with Raspbian

I'm trying to set my RPi 3B running Raspbian up with a VPN and I already subscribe to VPNSecure so I attempted to install it using the Linux instructions here: https://support.vpnsecure.me/articles/...
1
vote
1answer
62 views

Routing traffic with 2 VPN Gateways on RaspberryPi

I'm using Raspberry Pi to run OpenVPN client. I have 2 client connectios set up, using interfaces tun0 tun1 The raspberry pi uses interface eth0 to connect to the internet. Then I have USB ...
1
vote
0answers
53 views

Openvpn client issues

I have configured my RPI3 B with debian 9 (stretch) as a openvpn client. systemctl status openvpn ● openvpn.service - OpenVPN service Loaded: loaded (/lib/systemd/system/openvpn.service; ...
0
votes
0answers
2k views

Very poor OpenVPN performance on Raspberry Pi 4B

Recently I configured OpenVPN via PiVPN on my Raspberry Pi Model 4B with newest Raspbian Buster (4.19.58-v7l+) to have an access to my home network from anywhere. Since beginning I have a very poor ...
1
vote
1answer
124 views

Is there a way to keep a VPN connection permanent after shutting down?

I have been following the instructions posted here: https://www.addictivetips.com/vpn/raspberry-pi-vpn-setup/#respond and have been able to connect to a VPN server (NordVPN) easily. My Pi is ...
3
votes
2answers
737 views

Setting up Bridged VPN using: RPi 3G Hotspot router + openvpn client to connect to home RPi OpenVPN server

I have a Raspberry Pi 3B+ which is working as a hotspot using a Hologram Nova usb ppp0 device where it receives Internet from and routes the internet through WiFi and Ethernet. This Hologram usb ppp0 ...
1
vote
0answers
224 views

Linux VPN server without port forwarding

I want to make a VPN server on my raspberry PI. I know it's pretty much simple task but my router does not support port forwarding. So is there any other way to do that?
0
votes
0answers
145 views

Cannot connect Deluge Thin Client to RPie Deluge Server

I'm trying to setup my RPi 3 (buster) with a deluge server and a VPN (Private Internet Access) I have followed theses guides https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=223589 https:/...
2
votes
1answer
657 views

SSH into Raspberry Pi connected to OpenVPN

I want to be able to remotely ssh into my rpi, while my rpi is connected to PIA (via OpenVPN). I can ssh into the pi from my local network while the pi is connected to OpenVPN, and I can also ssh into ...
1
vote
0answers
154 views

Client can't connect to pivpn

I have a custom setup and wish someone could help. I have a main router(R1) and a secondary router(R2). I will refer to main router as (r1) and secondary router as (R2). (R1) is used for home ...
1
vote
1answer
619 views

PiVPN client cant connect to local network

I've managed to setup PiVPN on a Raspberry Pi 3+ and I can connect from the outside, I even have Internet access, but I don't have access to the local network. These VLANs are created under my USG ...
2
votes
1answer
89 views

Connecting Raspberry Pi to 2 separate networks

Hi I was wondering if the following setup would work. I am trying to accomplish the following. Connect to VPN server from outside my network and then VNC or RDP and possibly SSH into the other ...
1
vote
1answer
129 views

How to access PLC from Windows via Raspberry Pi connected through OpenVPN Access Server?

Device A (PLC, static IP=10.10.10.11) | | eth0 connection | Device B (raspberry B 3, Jessie) | | OpenVPN | Device C (laptop, Windows 8.1) I am ...
0
votes
2answers
98 views

pptp on raspberry behind fritz.box

I'd like to run a pptp vpn server on a raspberry pi in my home network behind a fritz.box. It should work like this: Android - internet - fritz - raspberry-pptp - internet Client can connect, but ...
1
vote
1answer
21 views

Changing username without affecting SSH certificate login

I have secured my SSH logins with certificate authorisation and I want to change my username, so I did. When I did this, I was denied access. Is there a way to change username without affecting the ...
0
votes
2answers
34 views

Communicate with computers on external networks

I'm trying to build an application with my RPi 3B that get some data from connected sensors. Once I got the data, I'd like to send them to a computer that is on an external network via a script in ...
2
votes
2answers
472 views

Simple openVPN with static keys

For private use I only want to use a simple peer-to-peer openVPN connection without maintaining a complete Public Key Infrastructure. I have heard it can be simplified by using static keys, but how ...
3
votes
2answers
742 views

Raspberry Pi as OpenVPN Access Point

I am trying to setup Raspberry Pi as VPN-WiFi access point connecting to AWS VPC. I followed Raspberry Pi as an access point Here are the all steps I performed in sequence Installed fresh full ...
0
votes
0answers
144 views

pureVPN router on pi3 B+ Noobs

I've been trying to setup my pi 3 B+ to be a VPN router, im using pureVPN as the service and have a combination of pureVPN's guidelines and the following two setup guides first the wireless access ...