Questions tagged [windows]

Referring to the Microsoft OS developed (primarily) as a traditional desktop experience. For the version of Windows that runs on the Raspberry Pi, please use the tag windows-iot.

Filter by
Sorted by
Tagged with
0 votes
0 answers
12 views

wine: cannot find L"/home/lubuntu/.wine/drive_c/windows/Neko"

i am inexpierenced linux user. I am trying to run exe file in wine on live usb lubuntu 22.04 The problem is that when i try to run in from terminal by pasting the destination along with the command ...
0 votes
1 answer
36 views

missing libusb-1.x to install openOcd to use picoprobe

I am trying to set up a picoprobe in order to program my rp pico using only wires (using another rp pico). I am following these instructions in Appendix A. I have windows 11 at the moment. When i try ...
0 votes
0 answers
20 views

Raspberry Pi 4 b 8GB RAM Speaker Jack works perfectly with Raspbian, but either no audio or static noise Windows 10 Suspect IRQ Conflict

I have read a lot of postings but not one has addressed the problem, everything from typing commands to pulling the 3.5mm plug out a little because its too long, try different types of plugs (stereo ...
0 votes
1 answer
121 views

How do I setup Raspberry Pi 4 to use with a Windows laptop?

I'm a new user with my first Raspberry Pi 4 (model B), but don't have a separate monitor, keyboard and mouse. I would like to use my laptop (running Windows) to use the Pi. So far I have: Downloaded ...
0 votes
1 answer
1k views

Where's the windows 10 driver for the Raspberry Pi Pico?

I have a brand new Raspberry Pi Pico. And when I connect it to my Windows 10 PC i get a new device with missing drivers. Guess what: pressing "Update Driver..." is not very helpfull here. I ...
  • 1
0 votes
0 answers
55 views

Raspberry Pi Touchscreen doesn't work with Windows 10

I have a Raspberry Pi Touchscreen connected to my Raspberry Pi. It worked perfectly with Raspbian but with Windows 10 it doesnt. I've done all the Windows Updates and don't know what to do to make it ...
1 vote
1 answer
87 views

How to check on which OS system the python program is running to import rpi.gpio?

Is there an easy way to let a python program check if it running on the raspberry Pi or the pc running windows? I would like to use this to automaticly use the rpi.gpio functions in my code. I am ...
  • 13
0 votes
0 answers
57 views

Raspberry Pi sending a file to Windows 11 via Bluetooth

My goal is to send an image from a Raspberry Pi 4 to a Windows 10 / Windows 11 machine using bluetooth and OBEX. So far I can pair the two devices but the Windows machine sees the Pi as an audio ...
0 votes
1 answer
137 views

Detection of USB Ethernet gadget by PyQt GUI in Windows 10

I am looking to implement this feature where a Pi connected to Windows 10 PC is detected by a PyQt GUI on the press of a soft button or through periodical scan of connected devices. I can see Pi in ...
0 votes
1 answer
77 views

Changed sd card disk signature in diskpart, now gets stuck booting

I have an SD card with a particular image on it that I wanted to back up before modifying anything in case I broke something. I inserted the card into my (Windows) PC and attempted to use Win32 Disk ...
0 votes
3 answers
133 views

USB sticks stop working with Windows 10 after being used with a Raspberry Pi 4 [closed]

I have a problem with my Raspberry Pi 4 2GB that involves USB sticks: I only have a minimal knowledge of both Linux and Raspbian so I don't know how to handle it. My problem is: each time I use an USB ...
  • 109
1 vote
1 answer
738 views

mDNS for Pi stopped working

First time setting up a Pi yesterday, I installed Raspberry Pi OS Lite 64 bit and filled in options in the Imager application to configure wifi out of the box, as well as setting the hostname and ...
  • 113
-1 votes
2 answers
467 views

Windows 11 Raspberry Pi Imager Access Denied

After Preparing to write... (opening drive) i have access denied. Everything stops with removed partitions, but new aren't generated. Error i can see is Error writing to storage Then i saw error
  • 127
0 votes
0 answers
42 views

what is the project structure of a c/c++ project for rp2040(pico)?

When we make a project for STM32 environments, we get a structure where all the header and .c files are stored in separate directories like src, include, etc which depends on the IDE that is being ...
0 votes
1 answer
106 views

Raspberry pi controlling servo with dotnet

Hello all i am trying control servo motor usiun dotnet and Unosquare.RaspberryIO librery. This is my code and whatever I pass to the PayTonemethod the motor rotates only in one direction and one speed....
  • 101
1 vote
0 answers
137 views

raspberry pi zero 2 w usb drive connection to windows 10

I wanted to use a raspberry pi zero 2 w...as a usb drive stick on windows 10. So I got a raspberry pi zero 2 w...then I got this device to connect to my usb connection on my windows 10 box: https://...
0 votes
1 answer
607 views

How to use only pi-hole dns in Windows 10 client, exclude router dns

I have installed pi-hole on two Raspberry Pi 4 devices. Both are connected to my network and working. I have an ATT router, so I cannot change the DNS servers in the router. I am attempting to set ...
0 votes
1 answer
62 views

Permissions issue using hard drive [closed]

I am new to using raspberry pi. I've wrote a script in python that takes images and stores them in a connected hard drive, in a directory that is created by the script. When trying to open the files ...
  • 9
1 vote
1 answer
226 views

Windows 11 Pro not booting when installed onto a USB via WoR:

I recently created a Windows 11 Pro ARM64 .iso through uupdump.net aria2c to .iso conversion everything went fine the .iso was made i then launched WoR (Windows on Raspberry) everything was done ...
0 votes
0 answers
119 views

Windows 10 PC slow initial login access to SMB share folder on Raspberry Pi 4B

The persistent problem is after setting up a samba server on the RPi4, the initial connection to it is extremely slow on a Windows 10 PC. After connecting and logging in it is fast and remains fast ...
1 vote
0 answers
270 views

How can I fix a broken SMB share of a printer with Windows 10

I have a printer connected and configured to my Raspberry Pi. It is installed through CUPS and shared through SMB. For about half a year this worked flawless in printing from my Windows 10 laptop. All ...
  • 111
0 votes
0 answers
118 views

Dual Display on Raspberry Pi 4

I have Windows 10 IoT Enterprise 2021 on my Raspberry Pi 4 (8 gig Ram). I want to use both the HDMI display ports but just HDMI 0 works, so I followed the instructions in this Youtube video and files ...
  • 35
0 votes
0 answers
126 views

How to install internet explorer and/or x86 emulator on raspbery pi 4b

I have a rasbery pi 4b 8gb and I want to install internet explorer on it. I am running ubuntu 21.10. I tried installing internet explorer 8 with PlayOnLinux and the installing window says "...
0 votes
0 answers
41 views

SSH from Windows STOP working abruptly to RPi 4

I am not able to connect to my RPi4 via SSH (Open SSH) from windows abruptly. it was working fine and stop working suddenly. I am able to ping to RPi from windows successfully. SSH from this windows ...
  • 1
0 votes
1 answer
196 views

SSH randomly disconnects from 3A+

I've been experiencing SSH disconnects and freezes ever since I got my Raspberry Pi 3A+. I connect to the 3A+ from my Windows machine using SSH over WLAN, and after about 5 - 10 minutes it hangs or ...
  • 1
-1 votes
2 answers
350 views

Installation of rPi Imager failes on Windows 10

I have 6 Micro SD chips that I want to put various Raspberry Pi Operating Systems on. I tried downloading version 1.6 of the imager from the official software page twice yesterday. After downloading I ...
0 votes
0 answers
263 views

Is there any to address the GPIO pins in Windows 11?

I just got my Raspberry Pi 4 and want to run some servers. The server I want to run, runs exclusively on Windows, and not even Wine works. I also need Windows 11 for the improved x86 on ARM emulation. ...
1 vote
2 answers
75 views

Temp mount works but permanent mount errors - Raspberry Pi to Windows

I am trying to access a shared drive on a Windows server from a Raspberry Pi 3. My temporary mount works - sudo mount //192.168.1.10/Files /home/pi/Files -o username=Myname,password=Mypassword - I can ...
1 vote
1 answer
319 views

How to install IoT version of Windows on Raspberry PI 4?

I wanted to see if there is a way to install Windows 10 IoT edition on Raspberry Pi 4 or not? I already knew that Windows 10 IoT edition can be installed on Raspberry Pi 3, but recently I noticed that ...
  • 35
1 vote
0 answers
34 views

how to backup and minify the backup (Windows 10 for ARM)?

how to backup and minify Raspberry Pi with installed Windows 10? I want to deploy my modified rpi4 windows10 installation to multiple SD cards with different amount of storage while saving storage on ...
5 votes
2 answers
602 views

Pi stops responding to pings from one host, until that host is pinged from the pi

I have a small office network run with Unifi. My main Windows workstation (on wired ethernet) is unable to ping one Raspberry Pi (WiFi) on my network (by IP or hostname): > ping -t funipi.tsl ...
0 votes
1 answer
61 views

Running arm64 windows binaries on arm64 Raspberry Pi [closed]

I am interested in running the arm64 binary of Teams for Windows on the Raspberry pi 4 8gb arm64, at the moment I am using Ubuntu 21.04. There is a version of teams for linux running on the Raspberry ...
  • 1
0 votes
0 answers
23 views

Pi2 as an USB-Switch to share his eth-connection

I want to share my thoughts and questions about using a Raspberry Pi as an alternate Switch/Router or whatever. First my problem is, I have 3 stationary PCs, all of them are connected to a switch (eth)...
  • 1
0 votes
1 answer
489 views

Use same SSD as Pi boot image and Windows/Pi file store

I’ve scoured the web and this forum for an answer to my question and came up empty. So apologies if this is answered elsewhere. I have a 1GB m.2 SATA SSD that I would like to BOTH use as my Pi boot ...
0 votes
1 answer
70 views

proper rdp on Windows using raspberry pi

I trying to do RDP on raspberry pi 4. Am using one windows 10 pro as an server and three raspberry pi 4(4GB debian buster) as an client.Installed remmina on all raspberry pi system and grant RDP ...
-1 votes
2 answers
70 views

Is it possible to install Windows 10 on a Raspberry pi 4 using diskpart?

If it is a 4gb ram model whould it work?
  • 11
0 votes
2 answers
408 views

Windows can't resolve raspberrypi domain name

I currently have a Raspberry Pi 4 set up on my home network, running Pi-hole. I also have a desktop on this network, dual booting Windows and Linux Mint. When I'm running Linux Mint, I can connect to ...
  • 101
0 votes
1 answer
262 views

Installing Pi-Hole on Raspberry Pi OS via Windows: port 22: Connection refused

I've installed Raspberry OS on a MicroSD via the Windows installer downloaded here. I then used this tutorial. However, when I try curl -sSL https://install.pi-hole.net | bash via the Windows command ...
  • 103
0 votes
0 answers
331 views

Windows 10 Setup on Pi Zero not working

I'm trying to set up a Raspberry Pi Zero (not a Zero W) with Raspberry Pi OS Lite (32-bit), headless through USB. I'm not great with computers (using CMD is a real headscratcher for me), to put this ...
0 votes
1 answer
49 views

Override old SD card on windows

I have a KODi installation on the SD card and now I'm interested in overriding the SD card with another OS installation downloaded as ZIP. This sounds pretty easy but I'm using a Windows 10 device so ...
0 votes
2 answers
52 views

How can I install Windows on Pi 4 if I don't own a Windows computer? [closed]

I only have a Macbook and I have found that most installers for the Pi 4 are made to be run in Windows. Has anybody figured this out?
  • 11
0 votes
1 answer
90 views

Raspberry Pi 3B+ - Windows 10 IOT - Led Flashes 7 Times

I have a problem with my 3b+ that I am using as an aquarium controller. This controller seems to work fine for multiple days and then it stops updating my web server. Which it is supposed to do via ...
0 votes
0 answers
52 views

Optimize C code for ARM Cortex A53 (using RPi 3B+ for debugging)?

I need to debug (and possibly verify, profile and optimize) some audio algorithms for Arm Cortex A53. The algorithms take input from file as PCM samples, and also drop the output the same way, as PCM ...
  • 123
0 votes
0 answers
59 views

Raspberry Pi 4 as WiFi extender causes audio problems on Windows 10 when connected

After following tutorial provided in this answer i've managed to use my Raspberry Pi 4 as WiFi extender and it's working really good. The main and only problem is that when i'm connected on my PC with ...
0 votes
1 answer
39 views

Pi not reachable from W10 computer for a while after resuming W10 from sleep or cold start

After I resume my Windows 10 laptop from a sleepy state (or after rebooting), it can't reach one of my Raspberry Pi computers for some time. IMAP doesn't work, no ping, nothing. After a while (5-10 ...
0 votes
1 answer
404 views

Cannot access RPi server (node js) from a browser using hostname

I set hostname of my Raspberry Pi 3 to "myhost", avahi is running ok (systemctl confirmed, to run with myhost.local). From my Ubuntu WSL on Windows 10 I can ssh to the RPi with ssh pi@myhost ...
  • 103
1 vote
1 answer
1k views

VNC client on Raspberry Pi

is there a VNC-client (not server!) to view a remote windows desktop on raspberry pi, i.e. the pi attached to my TV? So that I can see my windows desktop PC there? I found lots of solutions, where the ...
0 votes
0 answers
135 views

How to install Generic / Text Only printer on Raspberry pi 4 with Windows 10

On windows 10 for Raspberry pi (ARM64), all basic printer drivers are present (microsoft, samsung), but "Generic" section isn't present! I need to install a thermal receipt printer (exactly ...
  • 1
-1 votes
1 answer
1k views

RaspberryPi4/Windows10 doesn't recognizes USB devices after boot

I've installed Windows 10 on my Raspberry Pi 4 (4 GB) with this Tutorial. That worked but when Windows started and wanted to run the setup, it no longer recognized my keyboard and mouse. So I can't ...
  • 103
0 votes
0 answers
101 views

nfs server on linux with windows 10 client

I have a nfs server on a raspberry pi 3 b+, that share an ext4 directory. The nfs client is a windows 10 computer. I have a problem with character encoding on client side. All accent characters are ...
  • 1

1
2 3 4 5
7