Return to Revisions

If your ssh "connection refused" error is due to a problem with the Raspian host's ssh keys (and one way to find out is to update them), you can replace them without booting into Raspian if you have access to a running Linux host, which I will call a "helper" host.

Your Linux helper host could be Raspian running on another pi, Linux running on PC hardware, or if you only have a Windows or Mac host, it could be guest virtual machine running Linux with VirtualBox, etc... Assuming you have a way to mount the Raspian media on that host, it's easy to reconfigure the SSH keys by simply overwriting them, because virtually all Linux distributions, (including Raspian), have openssh installed, which offers the same set of tools.

HOW TO REPLACE SSH HOST KEYS ON RASPIAN WITHOUT BOOTING INTO IT

Let's assume you've installed Raspian on a 16GB micro SD card.

1. Put that micro SD into a USB flash card reader, and insert it into a USB port on your Linux helper host. If you're using a virtual guest you'll have to configure it to intercept the USB device (micro SD card reader), otherwise your host machine may snag that USB host and the VM won't see it.

2. On the Linux helper host, as root, run fdisk -l to find the device associated with your Raspian media. In particular, you want to find the device associated with Raspian Linux ext4 partition.

For example, in the following fdisk output the Linux partition is at /dev/sb2

`$ sudo fdisk -l`

    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disklabel type: dos
    Disk identifier: 0x989b1246

    Device     Boot Start      End  Sectors  Size Id Type
    /dev/sdb1        8192    98045    89854 43.9M  c W95 FAT32 (LBA)
    /dev/sdb2       98304 30375935 30277632 14.4G 83 Linux

3. Mount the Linux partition, as follows (we'll assume the device is /dev/sb2 and the mount point is /mnt through the rest of the example).

   _{Note: Your actual device and chosen mount point may be different and you'll have to adjust this procedure accordingly.}

   $ sudo mount /dev/sb2 /mnt

4. Now you can generate new keys to replace the old keys in your micro SD's (Raspian OS) ssh directory:

    $ sudo ssh-keygen -f /mnt/etc/ssh/ssh_host_rsa_key -N '' -t rsa 
    $ sudo ssh-keygen -f /mnt/etc/ssh/ssh_host_dsa_key -N '' -t dsa
    $ sudo ssh-keygen -f /mnt/etc/ssh/ssh_host_ecdsa_key -N '' -t ecdsa -b 521
   

5. Now eject the micro SD card, so you can safely physically remove it:

   $ sudo eject /mnt

   _{Note: Eject will fail if any terminal windows are still cd'd into any Raspian partition directories, so either close any such windows or cd to a different directory.}