3
votes
Accepted
What are my options to get the BMP180 to work?
A couple of thoughts:
The repo you used is stale, and abandoned by its author - that may be a problem. Try to find another repo that's more frequently used and maintained - this one might be better, ...
- 20.3k
2
votes
BMP180 allow to read calibration but fail to read data
the borsch documentation for the chip is available at: http://ae-bst.resource.bosch.com/media/products/dokumente/bmp180/BST-BMP180-DS000-12.pdf
the chip documentation does not agree with the posted ...
- 131
2
votes
Accepted
LCD(20x4) module with 2 sensors
Except for total available amperage, there is no limit to the number of things you can attach to one 3.3V pin. They are both connected together in parallel anyway; having 2 is just a convenience. If ...
- 57.9k
1
vote
RPi2 raspbian I2C error - BMP180 sensor
In my experience with the BMP180 sensor module I have (not exactly like your adafruit? one), it can periodically refuse to respond to I2C, seemingly at random. There is a soft-reset command for this ...
- 111
1
vote
Not all devices that are connection via I2C are showing
I had the same problem. The board is not faulty, the problem is caused by the MPU6050. Add these lines to the MPU6050 initialization process:
self.bus.write_byte_data(self.address, 0x37, 0x02)
self....
- 95
Only top scored, non community-wiki answers of a minimum length are eligible