5 votes

raspberry pi as access point with captive portal

Follow the instruction: 1. Config the RPi as a Wifi Access point or a Wifi Hotspot sudo apt-get -y install hostapd dnsmasq nano /etc/hostapd/hostapd.conf Add the config below to the ...
M. Rostami's user avatar
  • 4,293
5 votes

raspberry pi as access point with captive portal

Captive portals work because devices make a DNS request to specific URLS, depending on which operating system, and they expect a success response. If they get a redirect instead, then they will show ...
Michael Smith's user avatar
3 votes
Accepted

Is it possible to add a captive portal to a wifi network just my connecting a pi to the router?

I was wondering if its possible to have a setup where just by plugging a raspberry pi via ethernet or usb to a router and the pi being connected to the network everyone trying to access the network ...
techraf's user avatar
  • 4,319
2 votes

Is there a captive portal / setup portal to setup WiFi on the Raspi? Like on some WiFi range extenders

You are asking if an installation is available with the characteristics you described. The answer is No. You have to setup an access point. There are many tutorials available how to do it. The other ...
Ingo's user avatar
  • 42k
2 votes

raspberry pi captive portal

I do not understand the problem. If you have switched on your access point, then there is a web server running on it. You simply connect to it by entering the name or ip address in the browser of a ...
Ingo's user avatar
  • 42k
1 vote

Set WiFi Adapter as Eth0

I haven't heard before from an USB/WiFi dongle that emulates a wired connection eth0. Normally a wireless interface, used for a client uplink connection, cannot be added to a bridge. This is only ...
Ingo's user avatar
  • 42k
1 vote
Accepted

Issue with nodogsplash saying it needed updateed libmicrohttpd-dev, but I seems no new update have been updated?

Set the option in the /etc/nodogsplash/nodogsplash.conf file: use_outdated_mhd 1 It can force the use of the old version at the risk of loss or corruption of form data, for example when using ...
M. Rostami's user avatar
  • 4,293
1 vote

captive portal with apache on a raspberry pi

At first, make sure you have configured the raspberry pi as a Wifi hotspot and check it on other devices. If other devices can connect to the AP of your raspberry pi and they get an IP address, follow ...
M. Rostami's user avatar
  • 4,293
1 vote

raspberry pi as access point with captive portal

In case of you need a customizable captive portal you can install all using this project Kupiki https://github.com/pihomeserver/Kupiki-Hotspot-Script Once installed you can replace the captive portal ...
Pi Home Server's user avatar
1 vote

Is it possible to add a captive portal to a wifi network just my connecting a pi to the router?

Obviously, it's the wrongest way! Actually, if you do that, you remove the functionality of the router. I recommend trying to install OpenWrt on your router if it's possible. It has a captive portal (...
M. Rostami's user avatar
  • 4,293

Only top scored, non community-wiki answers of a minimum length are eligible