New answers tagged

0

I'd suggest getting a router that can run Merlin (Asus comes to mind) You can then setup your modem/router to force VPN for all or select clients connected. ExpressVPN has instructions on how to do this... that said I no longer use ExpressVPN. They changed hands a few months ago, I now use MULLVAD. Not only do I have my router sending VPN to Mullvad say... ...


0

You may need to check that your ISP is not blocking or redirecting port 53. Some ISP's force you to use their DNS servers, regardless of your modem/router DHCP or your localhost's static IP settings. See also this question on the Superuser SE.


0

I had the same problem when I set up an static IP so I changed the DNS. I resolve adding to /etc/dhcpcd.conf the google dns. static domain_name_servers=8.8.8.8.


0

It's possible you have an internal IP conflict. Usually home routers reserve everything over 192.168.1.100 for DHCP. If 2 devices share the same IP, you can't guarantee which device receives the incoming http request. Given that you used a static 101, one of the first reserved DHCP IPs, that greatly increases the risk. Try a static IP between 192.168.1.2 ...


3

First, make sure your apache2 setup really works. Assuming you have a laptop connected to the same router as the Pi, open a browser and type in http://192.168.1.101:80/. Your Pi webpage should show up. If the webserver works, learn your public IPv4 address. Don't trust your provider or your router, and don't use DNS, visit https://whatismyipaddress.com/ or ...


0

UPDATE the server: sudo apt update sudo apt upgrade -y sudo apt dist-upgrade -y sudo apt autoremove -y sudo apt autoclean -y Install from original OVPN source: wget https://git.io/vpn -O openvpn-install.sh && bash openvpn-install.sh chmod +x openvpn-install.sh For client user/password feature: Edit the installer to have password login feature: `...


Top 50 recent answers are included