Hot answers tagged

7 votes
Accepted

MacOS Not Discovering Raspberry Pi Zero as an USB Ethernet Device

Background Okay so after a bit of research, I figured out what the problem was with a little help from Re4son. See the following forum thread for more information: MacOS not Discovering Raspberry Pi ...
Nicholas Adamou's user avatar
7 votes

Kali Linux image for Pi 3

You download the image for Kali from this page. You then extract the file on your PC and burn the image onto the SD card using something like Win32DiskImager. Plug the SD card into your Pi2/Pi3 with ...
Piotr Kula's user avatar
  • 17.3k
5 votes

Expand file system Kali Linux on SD card of 16GB

A quicker solution: Run apt-get install gparted GUI pops up Select ext4 + right click + "resize/move" Get all available space + "resize" "Apply All Operations"
cizzbar's user avatar
  • 51
5 votes

MacOS Not Discovering Raspberry Pi Zero as an USB Ethernet Device

For users with macOS Sierra (and I think newer): First, you need to have an RNDIS/Ethernet Gadget interface in the Mac's Network Preferences. This is available as standard on Sierra. However, it ...
Daniele Procida's user avatar
4 votes

tightvncserver - Displaying Grey Screen on Kali-Linux upon VNC Connection

Doing some additional research, I have come across an additional answer that has solved this problem for me in the past. ⚠️ Please note the below information: This solution works with any of the ...
Nicholas Adamou's user avatar
4 votes
Accepted

tightvncserver - Displaying Grey Screen on Kali-Linux upon VNC Connection

Apparently, Kali Linux 0.6 Raspberry Pi 3 w/ Nexmon contains older packages. Once issuing the command apt-get update && apt-get -y upgrade && apt-get -y dist-upgrade tightvncserver ...
Nicholas Adamou's user avatar
4 votes
Accepted

Can't ssh in Kali headless setup on Raspberry Pi3

I had the same issue some minutes ago. The issue is sourced in the fact that the Kali ARM image (in my case 2018.1 -> https://images.offensive-security.com/arm-images/kali-linux-2018.1a-rpi3-nexmon....
user81326's user avatar
3 votes

Raspberry Pi bootable Android

You'll need to install disk tools on your Android device. The most popular toolkit for this purpose is Busybox. Keep in mind that low-level filesystem access that you need to flash an SD card ...
Dmitry Grigoryev's user avatar
3 votes

How do I find the IP address of my Raspberry Pi 3B+

Since all RPi use b8:27:eb as the first three octets of their MAC address, you can use arp from your Mac/Linux PC, but you'll need to refresh the arp cache first. Here's a bash script that will do the ...
Seamus's user avatar
  • 21.7k
3 votes

Is it okay/not okay to add more repositories?

A Debian repository is mainly made for a specific distribution and even for a specific version of it. For Raspbian/Debian you will find different repositories e.g. for version Jessie (or old-old-...
Ingo's user avatar
  • 42k
3 votes

hi i have problem in kali linys

I had a similar problem on Raspbian: dpkg: unrecoverable fatal error, aborting: files list file for package 'init-system-helpers' is missing final newline E: Sub-process /usr/bin/dpkg returned an ...
Jens's user avatar
  • 31
3 votes
Accepted

Cannot install kali-linux-full in raspberry PI 4

From the Kali Linux website: kali-linux-full When you download a Kali Linux ISO, you are essentially downloading an installation that has the kali-linux-full metapackage installed. This ...
Paul's user avatar
  • 242
3 votes
Accepted

Kali Linux: Unable to install chromium or firefox on Raspberry Pi

First, run the following command to update the repos and update your packages: sudo apt update && sudo apt full-upgrade To install chromium: sudo apt install chromium To install firefox: ...
Toffee's user avatar
  • 88
3 votes
Accepted

Timout during ifup with multiple WiFi interfaces on Kali Linux

Upon writing my question, the answer came to me. I want to share it right away, so it shall help anyone else who stumbles over a similar issue. First, I took a look at the networking service unit to ...
mrkskwsnck's user avatar
3 votes

is iptables broken or is it a kernel related issue?

I managed to get this to work with a workaround by replacing iptables with iptables-legacy (mainly to get ufw working) You will need to do the following: sudo touch /run/xtables.lock sudo chmod a+r /...
B0b's user avatar
  • 31
3 votes
Accepted

RPI4 Model B won't boot Kali Linux, TV shows “No Signal” or Rainbow screen

check HDMI cable set hdmi_safe=1 try set parameters hdmi_group and hdmi_mode for your display (watch next point) read this link
Vladislav Tikhomirov's user avatar
2 votes

How can I switch between a built in display and HDMI?

I've been searching for the same. Here's the only thing I've come up with: First you need to know my hardware configuration: I power the unit by using the Raspberry Pi's power input -- not the ...
Dan H's user avatar
  • 176
2 votes

How to extend screen with a Raspberry Pi 2 with PiTFT?

You can only get output on one display at any time. To display X on your HDMI screen you have to disable boot into gui and start X manually, specifying the output via /etc/X11/xorg.conf.d/99-fbdev....
Re4son's user avatar
  • 31
2 votes

Pi 3 WiFi with airmon-ng

It's currently not supported, but there are people discussing implementing it. You'll have to use an external USB supported device.
Brandon's user avatar
  • 156
2 votes
Accepted

How to install RTC on RPi3 with Kali Linux as OS?

First, check that the /boot/config.txt you are editing is actually the on the first partition of the SD card. Although it is not technically necessary, Raspbian is set up to mount this partition on /...
goldilocks's user avatar
  • 58.7k
2 votes
Accepted

How do you rotate the Raspberry Pi touchscreen on Kali?

Needed to mount /boot first using mount /dev/mmcblk0p1 /boot You can then go in to the config.txt file using sudo nano /boot/config.txt and add the line lcd_rotate=2. ctrl+x, y, Enter, and then reboot....
TheHarpoon's user avatar
2 votes

Hostname stays the same after renaming

Steps to verify/edit hostname of raspberry pi (Raspbian Jesse) Login in to your raspberry pi and type hostname command on the terminal. This should return you the current hostname of the pi. How to ...
Varad A G's user avatar
  • 848
2 votes

Expand file system Kali Linux on SD card of 16GB

This will do it ... sudo kalipi-config
Casey Parker's user avatar
2 votes

My Raspberry Pi won't boot no matter what I do (It has worked before, nothing is broken)

First: I don't know how much power has the Amazon Alexa Charger, but anyway check if the charger has 5 Volts and MINIMALLY 2.0 Ampers, Second: I can't acess the website, but confirm if the Raspberry ...
yanko's user avatar
  • 318
2 votes

My Raspberry Pi won't boot no matter what I do (It has worked before, nothing is broken)

It's very common to write an image to the SD card that does not boot. If it does not boot the first time try writing another image. I always start with the default raspbian because it is well ...
user2821413's user avatar
2 votes
Accepted

Extend Root Partition Failure (Kali + RPi 3b+)

Probably because you adjusted partition table with fdisk, but did not resize the partition with resize2fs See Expanding partition on SD Try running sudo resize2fs /dev/mmcblk0p2 NOTE This is what ...
Milliways's user avatar
  • 59.5k
2 votes

How to exit read only filesystem to get write permission in order to download a driver form Github?

Try remounting root as read/write. Run mount to find the identifier and mount point, then run the following: rpi ~# mount -o remount,rw /partition/identifier /mount/point `
dubble_oh_nexus's user avatar
2 votes

Not able to close monitor mode in my Raspberry PI0W

As far as I understand your question you want to enable monitor mode on your wifi device. With kali linux I cannot help you because I don't use it. But the wifi device on your RasPi must support ...
Ingo's user avatar
  • 42k
2 votes

Kali tools on raspbian?

Yes, it's easy to install Kali on Raspbian. Follow the guide here or do the below: If you don't have Git run sudo apt-get install git Become root, run sudo -i or su then enter password Git clone, run ...
user96931's user avatar
  • 739
2 votes

How can I install java on a raspberry pi running kali linux

First point is Kali Linux comes preloaded with all languages like C, C++, and Java. To check, try the following command in terminal: java -version If it shows the Java information then Java is ...
pranav patil's user avatar

Only top scored, non community-wiki answers of a minimum length are eligible