21
votes
Accepted
How do I install pandas on Raspberry Pi?
Going back to basics, I looked at the installation page for pandas and found that pip install pandas isn't the recommended route on linux systems.
sudo apt-get install python-pandas did the trick.
18
votes
Accepted
Uninstall Docker
I had to use sudo apt remove docker-ce. The script at get.docker.com runs "$pkg_manager install -y -q docker-ce$pkg_version" so docker-ce is the package, not docker.
18
votes
How can I factory reset my Raspberry Pi 4 model B?
All the configuration is on the SD card.
There is no factory reset option.
You will have to reflash the SD card to get back to the original position.
16
votes
Install golang the easy way
As of Go 1.6 (February 2016), an official ARMv6 package is available for download. So, if your Raspberry Pi has ARMv6 or v7 (see cat /proc/cpuinfo | grep ARM), then just do something like:
wget https:...
15
votes
Accepted
Install golang the easy way
There's already a go compiler in, e.g., raspbian, which you can find with apt-cache search golang. This looks to be version 1.0.2.
The site you linked has pre-compiled tarballs of 1.3.3 available ...
15
votes
Accepted
How to install Raspbian without an SD card reader
On a B, B+, 2B or 3B you can't do it without something to write the SD card. The only things these models can boot from out of the box is a SD card.
You may well find that you can use a camera or an ...
14
votes
Do I still need rpi-update if I am using the latest version of Raspbian?
Meanwhile the kernel is part of the raspberrypi-kernel-package in Raspbian.
So rpi-update is not needed anymore to update the kernel.
There are several kernels in the package, that means it works on ...
13
votes
Accepted
12
votes
Do I still need rpi-update if I am using the latest version of Raspbian?
The answer marked as correct is in fact outdated, and in a problematic way: rpi-update will update the firmware to the latest published version, which has to be considered "not stable". So following ...
12
votes
Where is the archive.key for backports.debian.org?
Running the command
gpg --keyserver pgpkeys.mit.edu --recv-key 8B48AD6246925553
didn't work for me. gpg baild out with
gpgkeys: key 8B48AD6246925553 can't be retrieved
gpg: no valid OpenPGP data ...
12
votes
Where is the archive.key for backports.debian.org?
In my case a different key ID was missing when I tried to install backports.The answer above +1 also worked on my raspberry pi3 with raspbian jessie. I'm writing this just to make a point that you can ...
12
votes
12
votes
Accepted
How do you get C# onto your raspberry pi?
'Mono' is a toolset and C# used to create “.NET” compatible programs based on Linux, and the resulting binaries are fully compatible with Microsoft.NET.
start from the Basic programs given in the ...
10
votes
Install software on raspberry pi offline
To install programs on machine unable to access internet
enter command as normal and read output look towards end of results for the failed to fetch lines and enter these links into a web capable ...
10
votes
How do I install packages from the AUR?
All of the above answers are outdated. My answer is not very good, but hopefully avoids the issue of becoming outdated.
The official wiki explains, in detail, how one goes about installing/building a ...
10
votes
How do you get C# onto your raspberry pi?
I think you need to clarify what you are trying to achieve, but hopefully this will help.
Firstly, C# is a language. You write programs in C# and these will run on the .NET framework. It is the .NET ...
10
votes
Accepted
Custom Pi's for Commercial Applications
The manufacture of Raspberry Pi's as far as I am aware is by Element14/Premier Farnell. Originally they were made in China but are now produced in the UK, which is fitting, given the Foundation is a ...
10
votes
How can I factory reset my Raspberry Pi 4 model B?
Welcome to the world of Raspberry Pi! Fortunately, the operating system on a Raspberry Pi is typically Linux based, and I assume this is the same for you. If I am understanding your question correctly,...
9
votes
Accepted
How to restart setup wizard at first time startup?
Once you get to the end of the wizard, it will not reappear when your Pi is booted.
If you do want to use it again for some reason, just run it manually by typing (in the Desktop Run dialog)
sudo ...
8
votes
How do I install pandas on Raspberry Pi?
sudo apt-get install python3-pandas works for me on Pi4 and pandas version is 0.23.3.
8
votes
What is the standard file system that a SD card have to use before write Raspbian using dd command?
dd command, when used correctly, OVERWRITES all partition information along with the partition formats and everything else you might put on SD card. therefore, it does not matter, how SD card was ...
8
votes
Accepted
Upgrading from Pi to Pi2
The RPi 2 is backwards compatible with almost all software. I would recommend a full upgade though as it should give you the best performance. While we can run ARM6 code, ARM7 is better.
sudo apt-...
8
votes
Accepted
which windows 10 is for the raspberry pi 2?
I chose x64 for phone
Nope. The pi is not an x86-64 machine. Microsoft has not released a version for the pi yet, but has expressed the intention of doing so. [Later: They have now, follow that ...
8
votes
Accepted
Getting the latest version of R on the Raspberry Pi
What I did was sudo nano /etc/apt/sources.list and added the line deb http://cran.rstudio.com/bin/linux/debian jessie-cran3/
Beware that binary packages from there, such as the R interpreter itself, ...
8
votes
How do you get C# onto your raspberry pi?
The answers referencing Mono are largely correct, but I would recommend as an alternative checking out .NET Core instead. .NET Core supports Raspbian as a deployment target. For more detailed ...
8
votes
Custom Pi's for Commercial Applications
You haven't mentioned any hardware customisation, so assuming the hardware is standard and it's just your code you need to copy, you could build an image and use an SD duplication service like this (...
8
votes
Install base Raspbian from repository, not using an image
━━━ Setup using a Linux computer with intel processor ━━━
This installation uses another computer with an intel processor. If you want to run the installation on a Raspberry Pi then look at the other ...
7
votes
Does Atlassian JIRA run well on the Raspberry Pi?
Information regarding system requirements for JIRA in a self hosted environment can be found at https://confluence.atlassian.com/display/JIRA/JIRA+Requirements
JIRA Server Hardware Recommendation ...
Only top scored, non community-wiki answers of a minimum length are eligible
Related Tags
software-installation × 489raspbian × 136
apt × 41
pi-3 × 32
packages × 23
python × 21
sd-card × 21
linux × 21
ubuntu × 20
boot × 19
pi-4 × 19
raspbian-stretch × 15
pi-2 × 13
raspbian-buster × 13
noobs × 12
debian × 12
update × 12
operating-systems × 12
python-3 × 11
pi-3b+ × 10
raspbian-jessie × 10
raspberry-pi-os × 10
networking × 9
ssh × 9
opencv × 8