User dingo27mobile

2 votes

How can I simultaneously connect a UART device and an I2C device to a Raspberry Pi via a Cat6 cable?

answered Feb 4, 2021 at 9:49

2 votes

Pi Zero W rotate terminal

answered Jan 16, 2022 at 17:18

1 vote

Raspberry Pi Zero W won't connect to network

answered Feb 5, 2022 at 21:58

1 vote

Raspberry pi 4 suddenly stopped booting up

answered Dec 14, 2022 at 15:10

1 vote

Share Internet connection from raspberry pi 0 w to computer via USB cable

answered Dec 14, 2022 at 22:30

1 vote

How can I run a Raspberry Pi for a long time without disk failures?

answered Nov 21, 2023 at 21:10

1 vote

Accepted

BME280 sensor: OSError [Errno 5]

answered Nov 28, 2023 at 14:19

1 vote

Accepted

Bookworm Rpi3a+ running at 1.2GHz, cannot hit 1.4GHz

answered Jul 31 at 15:07

0 votes

Does an rPi 3B+ SSD require external power?

answered Nov 21, 2023 at 21:44

0 votes

Can using a power supply having the correct voltage but an underrated current spec damage a Raspberry Pi?

answered Feb 4, 2021 at 9:38

0 votes

Accepted

480x320 display HDMI - blank after boot

answered Nov 21, 2023 at 20:54

0 votes

Having issues with RPi zero 2w Not Booting

answered Dec 14, 2022 at 22:37

0 votes

How to support the power supply of servo motors using an ordinary AC-to-USB adapter?

answered Dec 14, 2022 at 22:11

0 votes

Raspberry pi-4 powered usb hub backfeed issues

answered Nov 30, 2022 at 21:36

0 votes

Raspberry pi 4 crashes when opening VLC, Openshot, or RPI-Imager

answered Feb 4, 2021 at 10:41

0 votes

Using Relays to Power off then Cut power to Pi Zero

answered Feb 4, 2021 at 10:51

0 votes

Could a USB-powered Raspberry Pi emulate a NO momentary switch (PC front panel SW signal) using its GPIO pins without causing damage?

answered Feb 4, 2021 at 11:44

-1 votes

Solid State Relay only turning on once

answered Jan 26, 2022 at 8:31

-1 votes

Switching a bistable latching Relay directly - Not enough power from GPIO?

answered Dec 20, 2022 at 14:41

-1 votes

Powering Raspberry Pi 5B with li-ion battries: Pi 5 just won't boot, stops booting mid-way

answered Jul 26 at 6:24

Stack Exchange Network

20 Answers

How can I simultaneously connect a UART device and an I2C device to a Raspberry Pi via a Cat6 cable?

Pi Zero W rotate terminal

Raspberry Pi Zero W won't connect to network

Raspberry pi 4 suddenly stopped booting up

Share Internet connection from raspberry pi 0 w to computer via USB cable

How can I run a Raspberry Pi for a long time without disk failures?

BME280 sensor: OSError [Errno 5]

Bookworm Rpi3a+ running at 1.2GHz, cannot hit 1.4GHz

Does an rPi 3B+ SSD require external power?

Can using a power supply having the correct voltage but an underrated current spec damage a Raspberry Pi?

480x320 display HDMI - blank after boot

Having issues with RPi zero 2w Not Booting

How to support the power supply of servo motors using an ordinary AC-to-USB adapter?

Raspberry pi-4 powered usb hub backfeed issues

Raspberry pi 4 crashes when opening VLC, Openshot, or RPI-Imager

Using Relays to Power off then Cut power to Pi Zero

Could a USB-powered Raspberry Pi emulate a NO momentary switch (PC front panel SW signal) using its GPIO pins without causing damage?

Solid State Relay only turning on once

Switching a bistable latching Relay directly - Not enough power from GPIO?

Powering Raspberry Pi 5B with li-ion battries: Pi 5 just won't boot, stops booting mid-way