Brett Reinhard
  • Member for 5 years, 10 months
  • Last seen more than 1 year ago
  • N/A
  • Glendale, CA
No audio output via USB sound card
0 votes

All Sound Cards should require at the very least 1 line of configuration in the /boot/config.txt You have 2 options of getting things to work Edit your /boot/config.txt and find the line dtparam=...

View answer
Automatically connect trusted Bluetooth speaker
4 votes

I have found that there are current issues with pulseaudio5 especially when it comes to audio playback over bluetooth. As such I propose that instead of having to debug those when they come along ...

View answer
Bluetooth Headphones paired/connected but no audio
5 votes

I have created a script that will set this up for you automatically. It is apart of another project but can used without the main project. Simply use the following commands git clone https://...

View answer
Launch kodi from startup and play track
0 votes

The first bit is quite easy, you can simply install kodi via apt-get, sudo apt-get install kodi -y There is also a file /etc/default/kodi Change the line ENABLED=0 to ENABLED=1 as far as starting ...

View answer
Hide Complete Boot Message from RPI booting
4 votes

I have had great success with the following (as far as quiet boot goes, I haven't tried any splash screens yet) dwc_otg.lpm_enable=0 console=serial0,115200 console=tty3 loglevel=0 root=/dev/...

View answer
Quicker boot w/Bluetooth and Python
Accepted answer
0 votes

we will be editing our /boot/cmdline.txt for the goal of speeding up our boot time. $ sudo nano /boot/cmdline.txt We will change the content to : dwc_otg.lpm_enable=0 console=serial0,115200 console=...

View answer
Unable to assign IP address to client using udhcpd
0 votes

You are almost there, you have all the proper setup (from what I can see) that is needed for hostapd to be working. The issue is with the dhcp, by default the latest raspbian has dhcpcd installed on ...

View answer
Kodi goes transparent with CLI overlayed
Accepted answer
1 votes

A simple fix of adding consoleblank=0 to the /boot/cmdline.txt file fixes the transparent CLI from overlaying on top of kodi. I believe you can disable the faded kodi screen somewhere inside kodi, ...

View answer
Raspberry Pi 3 bluetooth pairing issue with tablet
1 votes

Try creating a SP profile to the Pi. Edit the following file: sudo nano /etc/systemd/system/dbus-org.bluez.service Find the following line and add a compatibility flag '-C' to the end: ExecStart=/...

View answer
Shell Script won't kill PID when run by shairport-sync
Accepted answer
0 votes

Ok I have solved the issue. When shairport-sync is enabled with systemctl and enabled as suggested in the readme.md, a script is unable to kill the process due to the need for sudo. Since systemd is ...

View answer
Bluetooth AutoConnect on reboot , car setup with scripts
Accepted answer
2 votes

I guess I was able to answer my own question. At the end of my /etc/rc.local File I added the following line after of course I manually trusted my MAC address echo "connect AA:BB:CC:DD:EE:FF \...

View answer
Connecting to bluetooth speakers headlessly
0 votes

There are a couple way you might want to approach this. If you are using an android device you can download an app called Script Kitty, and run the following code: echo "connect AA:BB:CC:DD:EE:FF \...

View answer
Using Pi 3 for wireless display/miracast
2 votes

PiCAST 3 is out, but from what I can tell only streams YouTube videos? I may be wrong, but I haven't have much experience with it. You can find it here: https://github.com/lanceseidman/PiCAST ...

View answer
When trying to use Python 3.4 to import RPi.GPIO I get "ImportError: No module"
1 votes

The error that you are showing is due to case-sensitivity. The proper module name is 'RPi-GPIO'. However, in the case that that does not work you will need to install the RPi-GPIO library: sudo apt-...

View answer
RPi.GPIO python code fails only in .py file
Accepted answer
1 votes

Aside from what joan has mentioned in regards to your servos, based on the code you have the code is running properly. Lets take a second and breakdown the code so you can understand what is going on....

View answer
Plug a 5 V fan to GPIO 1 and 2
0 votes

You may begin to find that the while using a fan the entire time takes away from the normally quiet nature of the pi. As such it may begin to become annoying. I propose a different solution one that ...

View answer
Autolaunch Programs on LXDE startup
-1 votes

When Using sudo nano /etc/xdg/lxsession/LXDE-pi/autostart You are then able to add lines for example: @/usr/bin/python /home/pi/example.py Depending what you are running you will need to include ...

View answer
Wifi cuts out after a few hours, have to restart Pi
0 votes

It is a commonly known issue that if the pi is not powered properly , wifi and Bluetooth communication can be very finicky and have a lot of weird symptoms. While it is suggested to have at least a ...

View answer
How to attach a TFT display to Pi 3?
1 votes

If you are not well versed in writing kernel drivers, I would suggest forgoing tft and simply buying at 7in hdmi screen, they can sit on top of the header pins of the pi for power and usually come ...

View answer
Waveshare 4inch LCD drivers, error after installation: PANIC: VFS: Unable to mount root fs on unknown-block(179,2)
1 votes

This is what I followed to get mine working: use this /boot/cmdline.txt: dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait fbcon=...

View answer
How do I setup my Osoyoo touchscreen?
0 votes

I know this is a bit late but depending on your version you can get the raspberry pi image, but I contacted the manufacturer and they sent me a link for the drivers for v6.2 at the following link: ...

View answer