Timeline for Configure Rpi as router - error when starting network and DHCP interfaces
Current License: CC BY-SA 4.0
17 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Aug 23, 2019 at 0:00 | vote | accept | Nht_e0 | ||
| Aug 22, 2019 at 20:55 | answer | added | Ingo | timeline score: 1 | |
| Aug 22, 2019 at 19:26 | history | edited | Ingo |
edited tags
|
|
| Aug 21, 2019 at 21:25 | history | edited | Nht_e0 | CC BY-SA 4.0 |
edited body
|
| Aug 21, 2019 at 18:05 | history | edited | Nht_e0 | CC BY-SA 4.0 |
added 45 characters in body; added 7 characters in body
|
| Aug 21, 2019 at 17:57 | history | edited | Nht_e0 | CC BY-SA 4.0 |
added 45 characters in body
|
| Aug 21, 2019 at 16:14 | comment | added | Nht_e0 | @Ingo I added more details. Please disregard any prior details that may not make sense with the current setup | |
| Aug 21, 2019 at 16:13 | history | edited | Nht_e0 | CC BY-SA 4.0 |
changed figure, added more details
|
| Aug 21, 2019 at 7:11 | comment | added | Ingo | OK, the AP bridges WiFi and wired connection. But still unclear is how the RasPi connects to the ISP (Internet Service Provider) which is not a device. Usually you have a peace of hardware (modem, router) that connects to the ISP mostly with the PPPOE protocol or by a xG (GSM, 3G, 4G) satellite connection. How does the RasPi connects to your provider? Does it use PPPOE? This configuration is important because we have to check routing. Can you please edit your question and add the things to it that you have clarified in comments? | |
| Aug 20, 2019 at 21:47 | comment | added | Nht_e0 | @Ingo The connection from ISP is similar to any other home connection. Instead of connecting a typical router I have connected a RPi. The IP address for eth0 should be provided by the ISP. The DHCP server is for the internal network that is behind a NAT (provided by the RPi that acts as a router). The AP does not a provide any service. It only acts like a bridge | |
| Aug 20, 2019 at 21:25 | comment | added | Ingo | I do not understand how the RasPi is connected to ISP by eth0. How does the interface eth0 gets it ip address? For what do you need a DHCP server on the RasPi? Does not the AP provide a DHCP server? | |
| Aug 20, 2019 at 21:15 | comment | added | Nht_e0 | @Ingo OS is Raspbian buster Jul 2019. I am replacing the router with the RPi to get more insight into the traffic. I am using the existing router as an AP connected to the RPi because its signal strength is better and I don't want to buy a new wifi dongle or something similar :) | |
| Aug 20, 2019 at 21:00 | answer | added | kuzeyron | timeline score: 0 | |
| Aug 20, 2019 at 11:29 | comment | added | Ingo | What operating system do you use? What version? Is there a special reason why you don't connect the AP direct to ISP with an ethernet cable? | |
| Aug 20, 2019 at 7:04 | comment | added | tlfong01 | You might like to try the following tutorials: (1) Rpi Wireless Hotspot - elinux 2018aug elinux.org/RPI-Wireless-Hotspot (2) Setting up a Raspberry Pi as a Wireless Access Point raspberrypi.org/documentation/configuration/wireless/… (3) How to use your Raspberry Pi as a wireless access point - Stephen Lovely 2017july thepi.io/… (4) Setting up a Raspberry Pi 3 as an Access Point - Shawn Hymel learn.sparkfun.com/tutorials/… | |
| Aug 20, 2019 at 3:39 | comment | added | Milliways | "Can someone show me what I'm doing wrong?" Running a 7 year old tutorial designed for an obsolete OS. | |
| Aug 20, 2019 at 1:58 | history | asked | Nht_e0 | CC BY-SA 4.0 |