Skip to main content
Raspberry Pi

Return to Question

Bumped by Community user
Bumped by Community user
Bumped by Community user
Bumped by Community user
Bumped by Community user
Bumped by Community user
Bumped by Community user
Bumped by Community user
Bumped by Community user
Bumped by Community user
Bumped by Community user
Bumped by Community user
Bumped by Community user
Bumped by Community user
deleted 103 characters in body
Source Link
goldilocks ♦
goldilocks ♦
  • 60.1k
  • 17
  • 115
  • 230

I have been encountering problems regarding my raspberry pi 2. I've been following the instructions given @ https://learn.adafruit.com/pi-thermal-printer/overview

when I change parameters in my /boot/cmdline.txt and assuming that i have to disable [email protected] in exchange to commenting out the /etc/initab file. file. I still get a boot error: unable Ito stillmount getroot afs booton error:unknown-block(179 2)unable to mount root fs on unknown-block(179 2)`.

The sd card is fine, I just need to mount an image and it will run again.

I followed the instructions one by one and it seems that when I edit my cmdline.txt and disable my getty-service (in exchange of editing /etc/inittab) I reboot and get the error.

I think I have to disable serial service for the printer to work. anyone knows how to disable serial?

I have been encountering problems regarding my raspberry pi 2. I've been following the instructions given @ https://learn.adafruit.com/pi-thermal-printer/overview

when I change parameters in my /boot/cmdline.txt and assuming that i have to disable [email protected] in exchange to commenting out the /etc/initab file. I still get a boot error: unable to mount root fs on unknown-block(179 2)`.

The sd card is fine, I just need to mount an image and it will run again.

I followed the instructions one by one and it seems that when I edit my cmdline.txt and disable my getty-service (in exchange of editing /etc/inittab) I reboot and get the error.

I think I have to disable serial service for the printer to work. anyone knows how to disable serial?

I have been encountering problems regarding my raspberry pi 2. I've been following the instructions given @ https://learn.adafruit.com/pi-thermal-printer/overview

when I change parameters in my /boot/cmdline.txt and assuming that i have to disable [email protected] in exchange to commenting out the /etc/initab file. I still get a boot error: unable to mount root fs on unknown-block(179 2).

The sd card is fine, I just need to mount an image and it will run again.

I followed the instructions one by one and it seems that when I edit my cmdline.txt and disable my getty-service (in exchange of editing /etc/inittab) I reboot and get the error.

Post Reopened by goldilocks♦
added 10 characters in body
Source Link
goldilocks ♦
goldilocks ♦
  • 60.1k
  • 17
  • 115
  • 230

I have been encountering problems regarding my raspberry pi 2. I've been following the instructions given @ https://learn.adafruit.com/pi-thermal-printer/overview

when I change parameters in my /boot/cmdline.txt/boot/cmdline.txt and assuming that i have to disable [email protected] in exchange to commenting out the /etc/initab file. I still get a boot error: unable/etc/initab file. I still get a boot error: unable to mount root fs on unknown-block(179 2)`.

theThe sd card is fine, iI just need to mount an image and it will run again.

I followed the instructions one by one and it seems that when I edit my cmdline.txtcmdline.txt and disable my getty-service  (in exchange of editing /etc/inittab/etc/inittab) I reboot and get the error.

I think I have to disable serial service for the printer to work. anyone knows how to disable serial?

I have been encountering problems regarding my raspberry pi 2. I've been following the instructions given @ https://learn.adafruit.com/pi-thermal-printer/overview

when I change parameters in my /boot/cmdline.txt and assuming that i have to disable [email protected] in exchange to commenting out the /etc/initab file. I still get a boot error: unable to mount root fs on unknown-block(179 2).

the sd card is fine, i just need to mount an image and it will run again.

I followed the instructions one by one and it seems that when I edit my cmdline.txt and disable my getty-service(in exchange of editing /etc/inittab) I reboot and get the error.

I think I have to disable serial service for the printer to work. anyone knows how to disable serial?

I have been encountering problems regarding my raspberry pi 2. I've been following the instructions given @ https://learn.adafruit.com/pi-thermal-printer/overview

when I change parameters in my /boot/cmdline.txt and assuming that i have to disable [email protected] in exchange to commenting out the /etc/initab file. I still get a boot error: unable to mount root fs on unknown-block(179 2)`.

The sd card is fine, I just need to mount an image and it will run again.

I followed the instructions one by one and it seems that when I edit my cmdline.txt and disable my getty-service  (in exchange of editing /etc/inittab) I reboot and get the error.

I think I have to disable serial service for the printer to work. anyone knows how to disable serial?

added 262 characters in body
Source Link
littlewil
littlewil
  • 11
  • 3

I have been encountering problems regarding my raspberry pi 2. I've been following the instructions given @ https://learn.adafruit.com/pi-thermal-printer/overview when

when I change parameters in my /boot/cmdline.txt and assuming that i have to disable [email protected] in exchange to commenting out the /etc/initab file. I still get a boot error: unable to mount root fs on unknown-block(179 2).

the sd card is fine, i just need to mount an image and it will run again. anyone has an idea if putting:

"dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait"

onI followed the instructions one by one and it seems that when I edit my cmdline.txt and disable my getty-service affect the boot sequence(in exchange of my raspberry piediting /etc/inittab) I reboot and get the error.

I think I have to disable serial service for the printer to work. anyone knows how to disable serial?

I have been encountering problems regarding my raspberry pi 2. I've been following the instructions given @ https://learn.adafruit.com/pi-thermal-printer/overview when I change parameters in my /boot/cmdline.txt and assuming that i have to disable [email protected] in exchange to commenting out the /etc/initab file. I still get a boot error: unable to mount root fs on unknown-block(179 2).

the sd card is fine, i just need to mount an image and it will run again. anyone has an idea if putting:

"dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait"

on my cmdline.txt and disable getty-service affect the boot sequence of my raspberry pi?

I have been encountering problems regarding my raspberry pi 2. I've been following the instructions given @ https://learn.adafruit.com/pi-thermal-printer/overview

when I change parameters in my /boot/cmdline.txt and assuming that i have to disable [email protected] in exchange to commenting out the /etc/initab file. I still get a boot error: unable to mount root fs on unknown-block(179 2).

the sd card is fine, i just need to mount an image and it will run again.

I followed the instructions one by one and it seems that when I edit my cmdline.txt and disable my getty-service(in exchange of editing /etc/inittab) I reboot and get the error.

I think I have to disable serial service for the printer to work. anyone knows how to disable serial?

added 262 characters in body
Source Link
littlewil
littlewil
  • 11
  • 3
Post Closed as "Needs more focus" by goldilocks♦
Source Link
littlewil
littlewil
  • 11
  • 3