3

I recently got a RPi and when I plug it in both LEDs light up solid without flickering. It also does not show up on the monitor. Everywhere I've looked it says they should be flashing but they aren't. How do i fix this? It's a Raspberry Pi 2 Model B V1.1

Improve this question
6
  • Which model of Pi?
    – joan
    Commented May 9, 2015 at 19:51
  • Rasoberry Pi 2 Model B V1.1
    – Ryan Weissman
    Commented May 9, 2015 at 19:53
  • Red power LED should be solid. Green LED solid - never heard of that, sounds like a problem with the SD card.
    – joan
    Commented May 9, 2015 at 20:06
  • But what could've caused the problem/ how could i fix it. I've been googling for a while and can't find anything
    – Ryan Weissman
    Commented May 9, 2015 at 20:13
  • All I can suggest is that you re-image the SD card. Has this Pi ever booted?
    – joan
    Commented May 9, 2015 at 20:42

1 Answer 1

Reset to default
4

I faced a similar issue and the problem ended up being my SD card. I also had no display and the similar red and green light issue.

To rectify, I configured my SD card to Raspbian using Win32DiskImager and it worked. I was using the same Pi as you too.

Improve this answer

Not the answer you're looking for? Browse other questions tagged or ask your own question.