Skip to main content
added 359 characters in body
Source Link
Noir
  • 103
  • 2

I am using my RPi for some time now as a family server mostly for file sharing. Up till now I never had to access the internet via it (to the best of my knowledge). But now I would need it to access the internet in order to download an OMV plugin.

The only modification I did (to the best of my knowledge) to the RPi in terms of its network settings, was to assign a static IP address to the RPi within my home network. Otherwise I did not touch it. Now if I ping the router it works without issue. Yet if I ping 8.8.8.8 or Google.Com I get no response (network is unreachable).

What else could I do to diagnose and fix the issue? Looking at the guides on the internet it seems the internet connection should be a "plug and play", without requiring any further modifications. It also doesn't seem one would need to enter an SSID and WPA2 anywhere, which I find strange as all my other devices that are connected to the internet via WiFi or Ethernet need to do so.

I am using debian bullseye legacy 64-bit lite as the operating system on a Pi 4 Model B (8GB).

Here are the static IP settings that were setup directly via OMV (Network --> Interfaces):

eth0 setup for IPv4 was changed from the method from DHCP and no pre-fixed settings to:

IPv4 method: "Static"

IPv4 Address: "to the desired IP" (same as routers except for the last digit)

IPv4 Netmask: "255.255.255.0"

Gateway to "x.x.x.1" (thus the router)

I am using my RPi for some time now as a family server mostly for file sharing. Up till now I never had to access the internet via it (to the best of my knowledge). But now I would need it to access the internet in order to download an OMV plugin.

The only modification I did (to the best of my knowledge) to the RPi in terms of its network settings, was to assign a static IP address to the RPi within my home network. Otherwise I did not touch it. Now if I ping the router it works without issue. Yet if I ping 8.8.8.8 or Google.Com I get no response (network is unreachable).

What else could I do to diagnose and fix the issue? Looking at the guides on the internet it seems the internet connection should be a "plug and play", without requiring any further modifications. It also doesn't seem one would need to enter an SSID and WPA2 anywhere, which I find strange as all my other devices that are connected to the internet via WiFi or Ethernet need to do so.

I am using debian bullseye legacy 64-bit lite as the operating system on a Pi 4 Model B (8GB).

I am using my RPi for some time now as a family server mostly for file sharing. Up till now I never had to access the internet via it (to the best of my knowledge). But now I would need it to access the internet in order to download an OMV plugin.

The only modification I did (to the best of my knowledge) to the RPi in terms of its network settings, was to assign a static IP address to the RPi within my home network. Otherwise I did not touch it. Now if I ping the router it works without issue. Yet if I ping 8.8.8.8 or Google.Com I get no response (network is unreachable).

What else could I do to diagnose and fix the issue? Looking at the guides on the internet it seems the internet connection should be a "plug and play", without requiring any further modifications. It also doesn't seem one would need to enter an SSID and WPA2 anywhere, which I find strange as all my other devices that are connected to the internet via WiFi or Ethernet need to do so.

I am using debian bullseye legacy 64-bit lite as the operating system on a Pi 4 Model B (8GB).

Here are the static IP settings that were setup directly via OMV (Network --> Interfaces):

eth0 setup for IPv4 was changed from the method from DHCP and no pre-fixed settings to:

IPv4 method: "Static"

IPv4 Address: "to the desired IP" (same as routers except for the last digit)

IPv4 Netmask: "255.255.255.0"

Gateway to "x.x.x.1" (thus the router)

Source Link
Noir
  • 103
  • 2

RPi Connected to Router via Ethernet but not to the Internet

I am using my RPi for some time now as a family server mostly for file sharing. Up till now I never had to access the internet via it (to the best of my knowledge). But now I would need it to access the internet in order to download an OMV plugin.

The only modification I did (to the best of my knowledge) to the RPi in terms of its network settings, was to assign a static IP address to the RPi within my home network. Otherwise I did not touch it. Now if I ping the router it works without issue. Yet if I ping 8.8.8.8 or Google.Com I get no response (network is unreachable).

What else could I do to diagnose and fix the issue? Looking at the guides on the internet it seems the internet connection should be a "plug and play", without requiring any further modifications. It also doesn't seem one would need to enter an SSID and WPA2 anywhere, which I find strange as all my other devices that are connected to the internet via WiFi or Ethernet need to do so.

I am using debian bullseye legacy 64-bit lite as the operating system on a Pi 4 Model B (8GB).