Skip to main content
Raspberry Pi

Return to Question

added df -h output
Source Link
rasper
rasper
  • 276
  • 1
  • 3
  • 7

I've flashed a 2GB SD card with the Raspbian wheezy image from http://www.raspberrypi.org/downloads, which boots up fine, but after typing "startx", I'm facing an empty desktop with the raspberry logo; nothing further happens. The pointer moves, I can switch to other TTYs with Ctrl+Alt+Fx, but that's it. No desktop icons or other GUI elements.

Is this supposed to happen? Do I need to manually set up a light desktop environment, or is there something else I need to do?

(I've tried the Arch Linux image too, and it too boots up fine to the command prompt. I don't seem to have hardware or power problems.)

df -h output:

enter image description here

I've flashed a 2GB SD card with the Raspbian wheezy image from http://www.raspberrypi.org/downloads, which boots up fine, but after typing "startx", I'm facing an empty desktop with the raspberry logo; nothing further happens. The pointer moves, I can switch to other TTYs with Ctrl+Alt+Fx, but that's it. No desktop icons or other GUI elements.

Is this supposed to happen? Do I need to manually set up a light desktop environment, or is there something else I need to do?

(I've tried the Arch Linux image too, and it too boots up fine to the command prompt. I don't seem to have hardware or power problems.)

I've flashed a 2GB SD card with the Raspbian wheezy image from http://www.raspberrypi.org/downloads, which boots up fine, but after typing "startx", I'm facing an empty desktop with the raspberry logo; nothing further happens. The pointer moves, I can switch to other TTYs with Ctrl+Alt+Fx, but that's it. No desktop icons or other GUI elements.

Is this supposed to happen? Do I need to manually set up a light desktop environment, or is there something else I need to do?

(I've tried the Arch Linux image too, and it too boots up fine to the command prompt. I don't seem to have hardware or power problems.)

df -h output:

enter image description here

added 3 characters in body
Source Link
rasper
rasper
  • 276
  • 1
  • 3
  • 7

I've flashed ana 2GB SD card with the Raspbian wheezy image from http://www.raspberrypi.org/downloads, which boots up fine, but after typing "startx", I'm facing an empty desktop with the raspberry logo; nothing further happens. The pointer moves, I can switch to other TTYs with Ctrl+Alt+Fx, but that's it. No desktop icons or other GUI elements.

Is this supposed to happen? Do I need to manually set up a light desktop environment, or is there something else I need to do?

(I've tried the Arch Linux image too, and it too boots up fine to the command prompt. I don't seem to have hardware or power problems.)

I've flashed an SD card with the Raspbian wheezy image from http://www.raspberrypi.org/downloads, which boots up fine, but after typing "startx", I'm facing an empty desktop with the raspberry logo; nothing further happens. The pointer moves, I can switch to other TTYs with Ctrl+Alt+Fx, but that's it. No desktop icons or other GUI elements.

Is this supposed to happen? Do I need to manually set up a light desktop environment, or is there something else I need to do?

(I've tried the Arch Linux image too, and it too boots up fine to the command prompt. I don't seem to have hardware or power problems.)

I've flashed a 2GB SD card with the Raspbian wheezy image from http://www.raspberrypi.org/downloads, which boots up fine, but after typing "startx", I'm facing an empty desktop with the raspberry logo; nothing further happens. The pointer moves, I can switch to other TTYs with Ctrl+Alt+Fx, but that's it. No desktop icons or other GUI elements.

Is this supposed to happen? Do I need to manually set up a light desktop environment, or is there something else I need to do?

(I've tried the Arch Linux image too, and it too boots up fine to the command prompt. I don't seem to have hardware or power problems.)

Tweeted twitter.com/#!/StackRaspi/status/241959270818672641
Source Link
rasper
rasper
  • 276
  • 1
  • 3
  • 7

Empty desktop after typing "startx"

I've flashed an SD card with the Raspbian wheezy image from http://www.raspberrypi.org/downloads, which boots up fine, but after typing "startx", I'm facing an empty desktop with the raspberry logo; nothing further happens. The pointer moves, I can switch to other TTYs with Ctrl+Alt+Fx, but that's it. No desktop icons or other GUI elements.

Is this supposed to happen? Do I need to manually set up a light desktop environment, or is there something else I need to do?

(I've tried the Arch Linux image too, and it too boots up fine to the command prompt. I don't seem to have hardware or power problems.)