does anybody know if it is possible to use the RPI Camera module (Rev. 1.3) with the Pico or any other RP2040 board?
5
-
Define "possible". It certainly wouldn't violate any laws of physics, so it's likely possible to do given enough time and resources. Worst case, you could make a custom chip which translates the camera data stream into something the Pico could read.– Dmitry GrigoryevCommented May 11, 2022 at 9:16
-
Thank you very much for this helpful reply, Dimitry,– meyer_mit_aiCommented May 12, 2022 at 21:14
-
Note that there are microcontroller-friendly camera modules out there, such as OV7670 or OV5640.– Dmitry GrigoryevCommented May 16, 2022 at 8:11
-
I know. I use the OV7670.– meyer_mit_aiCommented May 21, 2022 at 22:21
-
Perhaps this answers the question raspberrypi.stackexchange.com/questions/47573/…– RossCommented Sep 11, 2022 at 2:13
Add a comment
|
1 Answer
No it is not.
The devices do not have a common interface (there is no way for the Pico to read/write the RPi camera module hardware).
