Return to Revisions

2 of 2

Commonmark migration

edited Jun 16, 2020 at 10:47

RGB LED is not lighting up

I connected an RGB LED(common anode) via the GPIO, and tried to get it to light up, but for some reason when I run the command, the LED does not light up. Here's the code I'm using

import RPi.GPIO as GPIO

GPIO.setmode(GPIO.BOARD)

GPIO.setup(11, GPIO.OUT)
GPIO.output(11,1)
GPIO.setup(13, GPIO.OUT)
GPIO.output(13,1)
GPIO.setup(15, GPIO.OUT)
GPIO.output(15,1)

try:
    while(True):
        request = raw_input("RGB:")
        if(len(request) == 3):
            GPIO.output(11, int(request[0]))
            GPIO.output(13, int(request[1]))
            GPIO.output(15, int(request[2]))
except KeyboardInterrupt:
    GPIO.cleanup()

And this is what my setup looks like enter image description here