1

I'm trying to connect my Raspberry Pi 3 to a GoPro Hero 4 camera that supports ad-hoc wifi connections so I can script some photo timelapses.

I'm able to connect from a Windows machine, but unable from the RPi3.

I tried the following commands:

sudo -i
ifconfig wlan0 up
iwconfig wlan0 mode ad-hoc
iwconfig wlan0 essid "goPro4_02"
ifconfig wlan0 10.5.5.20 netmask 255.255.255.0

Also I scanned first the available WiFi interfaces with the iwlist command to identify properly the ESSID and the quality of the signal.

3
  • Hi I know this is strange, but can you try using Cygwin and then connect to your Pi? I use ad-hoc networks everyday and I use Linux on my laptop and I can connect to any Pi easily. The reason I am asking you this is because Windows may not be able to let you access an unsecure Ad-Hoc Network. Use some POSIX libs like Cygwin and it may work.
    – Shan-Desai
    Commented Jul 14, 2016 at 12:53
  • I have no problema accessing the RPi3, I'm able to connect perfectly through ssh with the wired network and with the wifi when the RPi3 is connected to my wireless router. The problem is when I try to connect the RPi3 to a GoPro camera using the ad-hoc wireless.
    – Fabman
    Commented Jul 14, 2016 at 12:55
  • ah! i see. It should work if all the parameters are similar. no Pings work?
    – Shan-Desai
    Commented Jul 14, 2016 at 12:57

1 Answer 1

1

I am far from being an expert on ad-hoc networks, but it is possible. See Ad Hoc setup in RPi 3

What you have may work, but unless you disable the network management software you will have a conflict

2
  • But this explains how to setup pi 3 as an ad-hoc , not on how to connect to a device configured with ad-hoc. Or is it the same?.
    – Fabman
    Commented Jul 14, 2016 at 9:53
  • Ad-hoc networks are non-hierarchical. All need similar settings (obviously different IP).
    – Milliways
    Commented Jul 14, 2016 at 9:57

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.