I'm using Manjaro ARM (64bit), and by default it seems to log always to the active console. It took me a while to figure out how to change the cmdline to using console=/dev/tty1 instead of console=/dev/tt0 (there's no /boot/cmdline.txt since it's using U-BOOT, I had to modify /boot/boot.txt instead). But neither that nor changing /etc/systemd/journald.conf's TTYPath=/dev/tty1 or MaxLevelConsole=err seems to change the behaviour. What other settings could be causing this? The output is e.g.
[36300.723412] bcm2835-power bcm2835-power: Timeout waiting for grafx power OK
Which I also can obtain from dmesg --follow. (That error itself also suggests something fishy but unrelated to my question)
