1

After starting pi, the screen gets stuck at blinking cursor at uppermost left side corner. When Ctrl+alt+F2 is presssed the login prompts for very small interval & disappears and this (as shown below) goes on until ctrl+alt+F2 is pressed.

Raspbian GNU/Linux 9 raspberrypi tty2

raspberrypi login:

I am not able to type login and password for. Any solution to make this prompt still so that I can type login and password.

  • Try building a rescue system on a new SDCard. Boot that, mount the broken card in a USB reader and repair the damage (which is most likely permissions and ownership of files in /home/pi - specifically things like . Xauthority). – Dougie Mar 26 at 6:14
  • alternatively, use ssh to do the same - without the faff of purchasing another sd card, imaging it, purchasing a usb sd reader etc etc :p – Jaromanda X Mar 26 at 10:32
  • I am new to raspberrypi. Jaromanda X, Can you please elaborate how to use ssh. – Jashanjot Kaur Mar 26 at 11:07
1

It sounds like you MAY have a corrupted build. I experienced something similar a while back and since I had not fully set up the card, I reloaded the OS and the pi booted up fine. If you haven't customized the OS yet, it may be easier to reload the OS than taking the time to troubleshoot.

Also, you may want to verify that the card is fully seated and the power supply is functioning properly. Sometimes, the power management can act 'flaky' if supplied power is out of tolerance.

  • 1
    Considering how the question is written, it can be anything: corrupted image, defective SD card, screwed up permissions, flaky power, etc. Any guess is as good as the next. – Dmitry Grigoryev Mar 27 at 15:09
  • Thanks for answering. @voyager8 After reloading OS, Raspberry Pi is working fine now. – Jashanjot Kaur Mar 28 at 6:41
  • I have the same issue. Located a good quality 5V 2.4A power supply, a good expensive micro USB cable, and same thing. Rasbian OS splash screen for about 5 seconds, followed by a blinking cursor. What to do? – Andy J Aug 15 at 3:41
  • Okay, I have just found out from plugging my microSD card into a Linux machine that the card is just plain corrupted. But the confusing part is I always shut down my RPi in the correct way (never pulled the power). – Andy J Aug 15 at 4:48

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.