Questions tagged [crash]
This tag is for questions about a Raspberry Pi that boots, but crashes after boot.
67
questions
1
vote
1answer
37 views
Pi Zero with RS-485 interface operated inside breaker panel crashes
Setup
I am operating an Raspberry Pi Zero inside a distribution board. The pi is powered via usb using a din rail power supply and it connected to an usb-rs485-adapter to get modbus data from a smart ...
0
votes
0answers
55 views
Pi Zero keeps crashing while running pi-hole
Just got my first Raspberry Pi - a Pi Zero W. I bought it with the intention of running pi-hole on it. However, after an hour or two it will crash. This has happened 6 or so times now. I swapped ...
0
votes
0answers
41 views
How to track why two RPi's are constantly “freezing”…?
I have two RPi's, one 3B+ and one 4 8GB. Both run updated Raspbian with Node-Red, VNCServer, No-ip DUC and have SSH enabled. No mouse or display connected to any of them.
The 3B+ serves as the "...
0
votes
0answers
71 views
Raspberry Pi 4B Keeps Crashing
I'm not sure what happened. I have my Raspberry Pi 4B running on Raspbian Lite (May 2020 version). This all started happening when I decided to use my Pi to run a game server. I decided to submerge it ...
1
vote
1answer
123 views
ClamAV Error for scanning
I'm trying to install ClamAV on my pi zero. Which is an antivirus program.
I ran the command :
sudo apt install clamav
Then I typed in:
clamscan
But it said:
LibClamAV Error: cli_loaddbdir(): ...
1
vote
1answer
30 views
Raspbian Crashing on RPi2 | full screen goes to one (somewhat random) color when web browser loads heavy page
I've had this strange problem with my Raspberry Pi 2 for a long time now. I have it set up as a sort of third monitor for my main computer. I've installed Synergy and Redshift, then set the screen to ...
1
vote
0answers
207 views
My raspbian buster is stuck at Splash Screen with polkit.service!
I was working fine with my Rpi4 this morning. Next time when I started it was okay. Then there was some resolution issue. so I went into raspi-config and disabled the OpenGL. After a restart my PC is ...
-2
votes
1answer
42 views
3B+ locking up (blank video output) with red & green LEDs solid, requiring reboot. Which logs to check? [closed]
My Pi 3B+ (full config details at link) has started to lock up out of the blue (red and green LEDs on), requiring a reboot. Which system log(s) do I check to see what the problem might be?
0
votes
1answer
45 views
System crashes when a USB device is plugged in or a web browser is opened
I recently turned my pi into a standalone network following this guide: https://www.raspberrypi.org/documentation/configuration/wireless/access-point.md
But now when I open a web browser, or plug in a ...
1
vote
0answers
368 views
Freecad not working on my raspbian!
I just installed free cad on raspbian from repo . Then after the installation was complete when I preseed the freecad icon from menu it is opening. But when I am pressing new project the software is ...
1
vote
2answers
124 views
Weird problem with Raspberry Pi falling over
So I've been trying to trouble-shoot this myself for weeks.
I have a Pi3 (and a Pi4, though the 4 causes no issues).
My Pi3 is fully up to date, on Raspbian Linux 4.19.81-v7+
This issue persisted ...
0
votes
2answers
9k views
How am I supposed to set GPU memory in RPi4?
I am using RPi4 for a while and I found some problem playing videos on VLC and you-tube. After searching a long time I found that these problems can be solved by increasing GPU Memory. I found that ...
-1
votes
1answer
28 views
After my script crashes, I can't run any more scripts, RP 3 Model B+
I am running a script that is probably crashing. When I run it, nothing seems to happen, so I hit Ctrl + Z to halt the program. But then I can't run any other script on the Raspberry Pi 3 Model B+. ...
1
vote
1answer
54 views
Was stable now keeps crashing
My Pi keeps locking up - cannot interact with it via keyboard (even Ctrl-Alt-PrintScr commands) or anything else. Screen (console) frozen.
Pulling power out and rebooting brings it up looking fine ...
0
votes
0answers
74 views
Random crash after several hours
sorry for the next error)
I'm working on a project with my rpi, which just test on a student website if a teacher is absent, or if a lesson is moved. Actually, the rpi crash totally randomly : after 7-...
2
votes
1answer
696 views
How do I set my gpu_split?
My Emulation Station keeps crashing saying I need to make sure my gpu_split is set high enough and/or switch back to carbon theme. Can someone help me dial this in? Any thoughts or suggestions are ...
5
votes
1answer
5k views
How to revert from rpi-update to stable build
I have been using a RPi3 for the last year without any issues. I have had rpi-update as part of a regular update process (cron job).
Lately I have been experiencing crashes. I started to investigate, ...
3
votes
1answer
99 views
Is my Pi Zero W overclocking? Why does it disconnect?
I've got a Raspberry Pi Zero W which is connected to a 4 relay module, servo motor, and IR sensor. It has two functions: first, it operates continuously, watching the IR sensor and, when tripped, it ...
5
votes
2answers
334 views
Pin powered Pi crashes when servos move
I have been working on a circuit to power a Raspberry Pi and servo(s) from a single power source. The diagram below shows the basic configuration, although the 'AA battery' is actually two 18650s.
...
0
votes
0answers
42 views
Raspberry Pi 2 crashes on manual ifconfig command
I'm trying to manually set IP configuration on my raspberry pi 2. Using SSH I run the following command in the terminal
sudo ifconfig eth0 10.0.0.100 netmask 255.255.255.0 up
my raspberry pi then ...
1
vote
1answer
319 views
How can I diagnose a headless Raspberry Pi Zero W that hangs?
I'm trying to run my Pi Zero W as a motion detecting camera using RPI cam web interface but it keeps hanging after a few hours at most. Before it hangs, it can record motion detect videos and upload ...
1
vote
2answers
461 views
Opening any browser often crashes Raspbian
I've got a very simple setup on my Raspberry pi 2. It's a clean install of the latest version of Raspbian (via NOOBS) with Redshift and QuickSynergy installed. Almost any time I open a web browser, ...
0
votes
2answers
288 views
Restart Pi after ping failure?
I have been creating a prototype using Pi Zeros, they work great at my house but are failing often at customer's site (other side of country).
I do not know if the Pi kernel is crashing or if it's ...
0
votes
0answers
41 views
How to recover from a kernel panic like this?
Getting stuck while boot process, I don't remember installing anything on Kali linux raspberry pi
0
votes
1answer
811 views
Cannot start openELEC on Raspberry Pi 3B+
I've tried a whole bunch of media center systems for my fresh RaspberryPi 3B+. The most interesting one for me is openELEC, but unfortunately it is the only one I can't seem to successfully run - ...
0
votes
0answers
90 views
Is there a limit on Raspberry PI's display size?
I have been using Raspberry PI 2 and 3 for the last year and a half with no problem. However, over time I have noticed that different sizes of display connected to the PI effected how my software ran. ...
5
votes
1answer
223 views
Pi shuts down every day at 11:23 PM
I have a Pi Zero W running Raspbian Stretch Lite (June 2018). I'm using it to turn the crank on an automatic cat feeder. I've barely changed the base configuration: apt-get-installed git and samba, ...
3
votes
1answer
133 views
Everything is dead, but Pi 3B still boots
I left my Pi 3B (V1.2) alone, running a 64-bit build of Debian for a project. Everything was fine.
When I returned, however, I found that everything was dead. Nothing was connected to it, by the way.
...
1
vote
0answers
106 views
Kernel panic, real time clock (possibly), UPS Pico
Have a fresh install of KivyPie, which is some months old, with updates (have done apt update/upgrade).
It crashes:
and the reason seems to be these two lines
enable_uart=1
dtoverlay=i2c-rtc,ds1307
...
4
votes
2answers
6k views
Raspberry Pi 3B+ freezes randomly
General setup
My RPi is connected to a mouse, keyboard, and monitor. My swap size is set to 1000 MB and I'm not using wifi.
Problem
The RPi freezes randomly, meaning the GUI is frozen, no SSH ...
1
vote
0answers
671 views
Raspbian freezes consistently every day at 2 AM
I had a Raspberry Pi 2 Model B that I used as a media center, running Plex Media Server, connected to a NAS, where the media was stored, and a couple of scripts that would run once an hour (CRON jobs)....
0
votes
3answers
104 views
Pi freezes after softPwm
I'm building a robot car as a beginner project with a Raspberry Pi 3 Model B. It was easily possible to control the motors with help of the wiringPi library in C. To adjust the speed of my car I want ...
1
vote
5answers
3k views
RPi3B crashes randomly
Help needed with this, I've run out of ideas.
My RPi3 crashes randomly.
- Power supply 2.0A
- nothing connected to GPIOs
- HDMI, USB mouse, USB-keyboard and LAN are connected
- SD card is Sandisk ...
0
votes
1answer
524 views
How to reinstall python3 from binaries?
One of my RPis has a problem with python3:
root@sent121:~# python3
Segmentation fault
When debugging a print('hello') script I get
root@sent121:~# dbg python3
-bash: dbg: command not found
root@...
0
votes
1answer
250 views
After several days my Pi's stop being able to launch new processes nor allow SSH connections
We are running raspbian stretch and have our mono based application running fine however we've found that after several days (this can be 2 days it could be 7) that our PI's just hang.
Kernel: Linux ...
0
votes
1answer
838 views
Cannot boot into desktop after crashing
Good day all,
I am new to the Raspberry Pi. I have just purchased a Raspberry pi 3. I downloaded the Raspbian OS and installed it on a brand new 16GB Kingston microSD card.
First time I was ...
1
vote
1answer
4k views
Pi Zero W freezes/crashes/hangs from day 1
I have finally made the step and bought myself a Pi Zero W a few days ago. During the last 10 years or so, I have worked with multiple microcontrollers but never with a Raspberry computer. Hence, I ...
1
vote
1answer
375 views
Raspbian on RPi2 random total freeze since upgrade to stretch
I purchased a Raspberry PI 2 two years ago and installed Raspbian Jessie at the time.
I configured several services including nginx/ssh/... with very specific settings so complete OS re-install is ...
8
votes
2answers
18k views
Raspberry Pi 3 Freezes
My Raspberry Pi 3 Model B freezes randomly. This as been going on since I got it, about 4 months ago. It sometimes freezes on reboot causing reboot loops. It freezes on Chromium when all that's open ...
1
vote
2answers
411 views
PiFmRds: Raspbian freezes when I change windows. How do I fix it?
I am running my raspberry pi 3 with a radio station software PiFmRds
The program works fine but then when I go to move the window (or any other window) the system freezes and I have to unplug and ...
1
vote
0answers
437 views
Video streaming crashing after an hour
I would like to use a Raspberry Pi Zero to stream video from the camera.
I have WiFi and ssh setup, and all works well.
However, it appears that after an hour or so, the Raspberry stops streaming ...
0
votes
1answer
146 views
Freeze caused by bluetooth and webcam
My web app has a webcam running using ng-camera(based on webcam.js), and a separate bluetooth sniffer running on node js on the background. After several minutes running, the app and raspberry pi will ...
0
votes
1answer
405 views
Brand new Raspberry Pi, and it keeps crashing
So, I just bought a brand new Raspberry pi for the first time. I followed the instructional videos on their website, and I've got the default OS installed, however, after just a few seconds clicking ...
1
vote
0answers
37 views
Pi rebooting on 1 specific apt-get installation
I am experiencing a very peculiar problem with my Raspberry Pi 3 (model B V1.2), running the latest version of Raspbian (the June 2017 version).
Whenever I try to install nginx using apt-get, my Pi ...
0
votes
1answer
587 views
My mono service crashed - how do I figure out what happened?
I wrote a .net 4.0 mono service called snserver.exe and am hosting it on a Raspberry Pi via mono-service.
In order to run it, I execute the following line:
mono-service -l:/var/supernovaServer/...
1
vote
1answer
639 views
Lightning bolt then system crash. Only red light is on
I was using my pi 3 with the official power supply and compatible keyboard and mouse. I was just using geany like I normally would when the lightning bolt appeared (the sign for overloading the pi) ...
2
votes
2answers
79 views
Troubleshooting a crashes
My Raspberry Pi 3B is constantly crashing and rebooting, roughly every 10 min. Originally I thought it was only on Youtube. But it happens on many websites - hell I hope it doesn't crash before I can ...
1
vote
1answer
699 views
What's causing my Pi to freeze every few days?
I run my Pi headless, it's in my loft monitoring the output from my growatt solar inverter.
It runs a cron every 5 mins to update my data, no data no problem as the code handles this. I've stopped ...
0
votes
1answer
207 views
NTP crashes Raspberry Pi
I have a Raspberry Pi 3. I use it as a FTP-server provisionally.
Every 2/3 days it crashes because of a problem with the NTP. I have cut the power to reboot it.
I have the system logs which show ...
1
vote
2answers
159 views
Raspberry Pi 2 Crashes, ACT light blinking
after a while of my headless Pi being on it usually crashes so that I then have to psychically unplug power.
I have noticed that after a crash, red light is gone but the green LED ACT is blinking at a ...
