5
votes
Accepted
ImportError: No module named 'PyQt5'
Generally a good idea is to do a search on the Pi.
apt-cache search pyqt5
Perhaps the command you need is
sudo apt-get install python3-pyqt5
I suggest you always preferentially use apt-get rather ...
- 71.6k
3
votes
Sorry, could not load the WebRTC extension for UV4L
What worked for me is as follows:
I installed uv4l-webrtc-armv6 instead of uv4l-webrtc as given in the tutorial.
Above step replaced uv4l-webrtc by uv4l-webrtc-armv6 which I could see by using ...
- 31
2
votes
UV4L WebRTC from cellular network (no public IP)
First of all, every UV4L option documented in the man pages can be passed via both command line and configuration file.
If the UV4L Web Server running on the Rpi3 cannot (easily) be reached in any ...
- 106
2
votes
Raspberry 3 / chromium webRTC video quality
Chrome has a bug and the rpi needs a few extra flags set. This solved it for me:
Add Drivers:
sudo nano /etc/modules
i2c-dev
snd-bcm2835
bcm2835-v4l2
Add extra V4l2 video driver flag (for Chromium ...
- 21
1
vote
Rpi Webrtc echo cancellation - aec
There is an option that the AEC (Acoustic Echo Cancellation) you are trying to use is not capable of handling the echo tail in your system. I suggest to start by measuring the echo tail in your system....
- 11
1
vote
Stream Raspberry pi cam to webbrowser
I have found that the solution mentioned in
https://www.linux-projects.org/uv4l/installation/
works well. Out-of-the box, the video will have a text overlay, but if you give a "contribution" of $...
1
vote
Accepted
U4vl Streaming to multiple web clients
In order to stream the camera to more than one peer (e.g. browsers) at the same time you need a SFU or MCU. One supported by UV4L is Janus Gateway. Both UV4L and Janus are pre-installed in this DEMO ...
- 121
1
vote
Accepted
UV4L webRTC demo crashes Raspberry Pi 3
uv4l is not yet supported on raspbian strectch (debian 9)
- 141
1
vote
UV4L WebRTC from cellular network (no public IP)
At the end, I decided to put in place a reverse SSH tunnel and forward UV4L port to the public server.
I forward the port using the following command:
ssh -o StrictHostKeyChecking=no -Nf -R *:8080:...
Only top scored, non community-wiki answers of a minimum length are eligible